Scanning archi-dev-box from OUTSIDE found five ports serving their screens
with no login — lnd-ui 18083, bitcoin-ui 8334, fips-ui 8336, electrs-ui
50002 and the Fedimint Guardian 8175 — none of which appeared in the gate's
unprotected list. They are host-networked, so Podman publishes nothing to
pin and their manifests declared 'ports: []'; the gate builds its map from
declared ports, so it neither protected them nor reported them. An audit
that reports success while five screens are open is worse than no audit.
Their nginx now listens on 127.0.0.1 instead of 0.0.0.0, and each port is
declared 'auth: gated' so the daemon owns the outside. 'bind:' on a
host-networked app is a statement of where the container listens, not a
publish instruction — quadlet already skips PublishPort in host mode.
Guardian 8175 is declared on the fedimint app because its companion has no
manifest, and the gate keys on port, not container.
Credential paths were NOT exposed and are verified so: /lnd-connect-info,
the /proxy/lnd/ passthrough, container logs and every RPC method through
these screens all return 401 unauthenticated. What leaked was the page
shell.
Also fixes the delivery gap that would have made this unshippable: only
bitcoin-ui, lnd-ui and electrs-ui were ever rsynced to
/opt/archipelago/docker, so edits to fips-ui and fedimint-ui reached nodes
through no path at all. All five now sync; the two whose rebuilds the
daemon owns are synced without being handed to container-specs.
Every remaining undeclared port is now declared with a stated reason —
gated: botfights 9100, router 8084, pine 10380; exempt with rationale:
fedimint consensus 8173/8174, gateway 8176/9737, netbird 8086/8087 (TLS +
own auth, and enrolled devices cannot hold a session), pine TLS 10381,
lightning-stack REST 8091 (macaroon, mirrors lnd). Zero undeclared ports
remain across all 56 manifests.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
All four found by verifying on archi-dev-box rather than assuming.
container-specs.sh: archy-lnd-ui was specified as a BRIDGE container with
SPEC_PORTS="18083:80", but docker/lnd-ui/nginx.conf listens on 18083
directly (it must, to proxy the backend on 127.0.0.1:5678 same-origin).
Recreating from that spec publishes host 18083 to container port 80, where
nothing listens. Reproduced on the node: the app came back with :18083
refusing connections, HTTP 000. This never fired before because the running
containers are created by first-boot-containers.sh, which is host-networked
and never reads this file; the spec is only consulted when self-update.sh
rebuilds a UI image, and that only happens when a file under docker/lnd-ui/
changes — which is exactly what the previous two commits did. So the next
OTA would have taken lnd-ui down on every node. Now SPEC_NETWORK="host"
with no port mapping, matching what actually runs. NET_BIND_SERVICE dropped
with it: 18083 is unprivileged.
lnd-ui channels link: pointed at /apps/lnd/channels, but that route is a
CHILD of the /dashboard record in neode-ui's router, so the real path is
/dashboard/apps/lnd/channels. nginx's SPA fallback returns 200 for the
wrong path, so it failed as vue-router's NotFound view rather than an HTTP
404 — both the Payment Channels card and the Manage Channels button.
Both apps, copy buttons: navigator.clipboard only exists in a secure
context, and nodes serve these apps over plain http; the main UI also
embeds them in an iframe, where the async Clipboard API is separately gated
by the clipboard-write permission policy. Every copy button silently did
nothing there. Added an execCommand('copy') fallback behind a copyText()
helper and routed all six call sites through it.
lnd-ui Node ID: showed the bare pubkey whenever getinfo.uris was empty,
which is the common case — LND only populates uris once it is advertising
an external address. The bare pubkey is not what a peer pastes to open a
channel. The full pubkey@host:9735 URI is now built from the Tor onion
where available, falling back to this node's address, with a hint saying
which and what its reachability is. The QR encodes the URI too.
Verified on archi-dev-box: both images rebuilt and containers recreated
from the specs; lnd-ui and bitcoin-ui both serve 200 with the new assets;
and the RPCs the new tabs depend on all answer on the live node —
getblockstats returns every field the charts read, getpeerinfo returns 11
peers carrying relaytxes and network values the classifier handles.
Note for whoever tests bitcoin-ui's Insights/Peers tabs: /bitcoin-rpc/ now
sits behind auth_request /_session_check (a05956c4 et al), so it answers
401 to an unauthenticated curl by design. A logged-in browser sends the
session cookie same-origin, which is how those tabs get their data.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Five review fixes across both node UIs.
1. LND now uses the app-store icon. It was shipping its own 182KB lnd.svg
while the app store, My Apps and the signed catalog all render
neode-ui/public/assets/img/app-icons/lnd.png (catalog.json points at
/assets/img/app-icons/lnd.png). Same file is now vendored into the
image, so the app header, the launcher and the store agree. That icon is
a full-bleed square with an opaque white background rather than a
transparent glyph, so it fills the frame and is clipped to the inner
radius — exactly how bitcoin-ui frames its own icon — instead of being
inset with padding on a dark plate.
2. Header no longer squishes at tablet widths. Both headers had a single
768px breakpoint, so between 768 and 1024 the title and description got
crushed against the controls on the right (four status cards on
bitcoin-ui) and overlapped. Both now use three breakpoints: fully
stacked and centred below 768, logo + title on one row with the controls
wrapped underneath below 1024, single row above. The app name and
description are centred on mobile.
3. QR codes stay square. .conn-layout is a flex row on desktop and flex
items stretch by default, so the white QR plate was being pulled to the
height of the fields column and the square QR sat letterboxed in it. The
plate is now a fixed square inside a black glass panel that absorbs the
extra height, so the panel matches the fields and the QR stays square.
4. Buttons read as one family. The Settings button and both modal dismiss
buttons used the flat .glass-button while every other button on the page
used .info-card-button; they now all use the latter, via new .compact
(inline) and .icon-only (square) variants so the shared style works at
button size rather than only as a full-width card.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Verified live on archi-dev-box, code fix committed in f6b5245b but not
deployed. Deliberately logged as open rather than fixed: the defect that
matters to an operator is the running node, not the source tree.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
The Bitcoin UI was one long scroll: sync card, RPC/ZMQ cards and the
relay-sharing panel stacked on a single page, with node details hidden in a
modal. umbrelOS's rebuilt Bitcoin Node app splits the same surface across a
Home/Insights/Settings dock and shows considerably more.
Added, all of it additive — the sync state machine, the status-snapshot
staleness logic and the relay-sharing panel are untouched and just move
inside a tab panel:
- Five tabs (Node / Insights / Peers / Connect / Sharing) using the same
segmented control as lnd-ui, which becomes a fixed bottom dock under
768px with safe-area padding.
- Insights: the four stats umbrel's StatSummary shows (Connections,
Mempool, Blockchain Size, Node Uptime), a Latest Blocks strip, and
Block Size / Fee Rate / Block Rewards charts — the same three umbrel
plots, drawn as CSS bars so nothing has to load a chart library past
the CSP's script-src 'self'.
- Peers: sortable, filterable table with umbrel's exact columns (Peer,
Network, Relay TXNs, In/Out, Connected) plus ping. Network is derived
from getpeerinfo's own `network` field, falling back to address
matching, so Tor/I2P/CJDNS/Local/Clearnet are labelled correctly.
- Connect: RPC and P2P details with a Local/Tor selector, QR codes and
per-field copy buttons (umbrel's ConnectionDetails), including its
unencrypted-LAN warning on Local.
Block statistics come from getblockstats, one call per block for the last
ten, cached by height so only the new tip is re-fetched. The live tabs poll
only while visible rather than adding a third unconditional 5s timer.
Also removed the hardcoded "archipelago123" from copyRPCInfo. That string
was never the node's actual RPC password — the real one is a
manifest-declared generated secret rendered into this app's nginx upstream
and deliberately never sent to the browser — so copying it could only ever
mislead. The Connect tab says where the password actually lives instead.
qrcode.js is vendored from docker/lnd-ui (same file, already CSP-clean) and
added to the Dockerfile's COPY set.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
The LND UI was a single scrolling page with a flat gradient instead of a
background, a permanently-disabled "Wallet" card, and four tabs buried
inside a Settings modal. Everything a node runner actually wants to see —
routing revenue, peers, liquidity, activity — was absent.
Rebuilt against the feature set of umbrelOS's Lightning Node and Bitcoin
Node apps (getumbrel/umbrel-lightning, getumbrel/umbrel-bitcoin), rendered
in Archipelago's own idiom rather than copying their visual design:
- Real background. bg-web5.jpg was already being COPYd into the image by
the Dockerfile and simply never referenced; it now drives the same
perspective-layer + 0.8 overlay treatment bitcoin-ui uses. Paths stay
relative because the app is served at / on :18083 but under /app/lnd/
when proxied by the host nginx, where absolute /assets 404s.
- Glass cards with the masked gradient border, matching bitcoin-ui exactly.
- Six top-level tabs (Overview / Channels / Activity / Insights / Connect /
Settings) replacing the one-page scroll — umbrelOS's Home/Insights/
Settings dock, widened for Lightning. On mobile the bar becomes a fixed
bottom dock with safe-area padding; on desktop it is a segmented control.
- Overview: total/lightning/on-chain balances, a Max Send vs Max Receive
liquidity bar (Umbrel's framing), and peers/channels/capacity/routing
stat tiles.
- Insights: routing revenue over 24h/7d/30d from /v1/fees, channel totals,
network graph stats, and a sortable+filterable peers table with Umbrel's
Tor/I2P/Local/Clearnet classification.
- Activity: merged Lightning payments, settled invoices and on-chain
transactions on one timeline, filterable by rail.
- Connect: the existing lndconnect QR flow, plus a Node ID panel with the
pubkey and advertised URI (umbrel's NodeIdModal).
- sats/BTC unit switch persisted to localStorage (Umbrel's SatsBtcSwitch).
Channel management deliberately links out to the existing Archipelago
channels view at /apps/lnd/channels rather than being reimplemented here;
this app only shows a read-only channel overview.
Sync progress tracks the synced_to_chain/synced_to_graph booleans rather
than inventing a block-based percentage, because LND exposes no IBD ratio.
All data comes through the existing authenticated GET proxy at
/proxy/lnd, so no backend, manifest or nginx change is required.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
The shells are served at / in their containers but under /app/<id>/ in
the public demo, where absolute /tailwind.css and /assets/... 404 — the
Bitcoin UI rendered unstyled with a giant unconstrained SVG. Relative
paths resolve correctly in both contexts.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
The Bitcoin UI loaded the Tailwind Play CDN at runtime: unstyled on
offline nodes + a production console warning. Replaced with a
hand-extracted static stylesheet (~125 utilities actually used, same
approach as lnd-ui), served from the container. podman build + runtime
smoke test verified (GET /tailwind.css 200, zero cdn references).
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Fetched from /proxy/lnd/v1/balance/{blockchain,channels}; the cards stay
hidden when the endpoints are unavailable so older deployments are unaffected.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
On NAT'd nodes that can reach the iroh federation neither directly nor
via iroh's public relays, fmcd's embedded iroh networking enters a
relay/hole-punch reconnect hot-loop that pegs its entire CPU allotment
indefinitely (observed ~1 core sustained for 4 days on a Tailscale node,
while LAN nodes that reach the guardian directly stay <3%). fmcd 0.8.0
exposes no iroh/relay knobs, so:
- fmcd-run now samples fmcd's own CPU and restarts it when it stays near
its allotment for ~15 min (a restart demonstrably clears the stuck iroh
state; real work is bursty and never flat-pegs a core for minutes).
- Lower cpu_limit 1 -> 0.25 core so a stuck instance can't starve the
node (steady-state is <3% of a core; joins are brief).
Ships as fmcd:0.8.1 (launcher-only rebuild, same fmcd binary). Bumped the
image pin + cpu_limit in the manifest, image-versions.sh, the embedded
catalog manifest (releases/app-catalog.json), and the UI catalogs.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
The frontend nginx used a literal proxy_pass host with no resolver, so it
pinned mempool-api's IP at worker startup. When the backend restarts (gate,
OTA, crash, reboot re-IPAM) podman reassigns its IP and nginx keeps proxying
to the dead one -> /api hangs, websocket 502s, UI shows 'offline' until a
manual nginx reload. Same stale-upstream-IP class as the netbird 502.
Fix: mempool-frontend:v3.0.1 rewrites the generated nginx-mempool.conf to
re-resolve the backend per-request via 'resolver' + a variable proxy_pass.
Resolver address is read from /etc/resolv.conf (podman aardvark-dns answers
on the network gateway, not Docker's 127.0.0.11). Per-location path mapping
preserved (ws -> '/', /api/v1 identity via no-URI, /api/ -> /api/v1/ rewrite).
Proven on .228: backend IP change now auto-recovers with no reload; the
literal-host control still 502s. Migrated the manifest off the retired
tx1138 registry to vps2.
Also: mempool.bats #74 waited only 180s post-restart (the slow path) and
called an undefined 'fail' helper (status 127). Bumped to 300s to match the
passing parity probes and emit a real failure instead.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
UI (this session):
- Global audio player now scales the whole interface into the space above it
on desktop (sidebar + main) and docks directly above the tab bar on mobile;
it stays visible while navigating.
- Mesh mobile redesign: floating Chat / BTC / Dead Man / AI / Map tab strip
with a single fixed, internally-scrolling pane (page no longer scrolls);
tabs hide while a conversation is open; floating back button; collapsible
Device panel (starts collapsed); keyboard-aware conversation sizing via
VisualViewport so the chat sits just above the keyboard.
- Cloud file grid: uniform 4/3 card heights (folders + images match).
- Swipe left/right switches tabs on the Apps and Web5 screens.
- Map tool fills its pane (no bottom gap); fix skewed Share Location toggle
on mobile (global min-height rule was deforming the switch).
- Trim redundant helper copy from the mesh AI tab.
Also bundles pre-existing in-progress work that was already in the tree:
mesh listener/session + wallet + container + bitcoin-status backend changes,
docker UI updates, and assorted other UI tweaks.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
- docker/fedimint-ui/nginx.conf: the local /assets/ handler 404'd the real
fedimint guardian UI's own bundled CSS (bootstrap.min.css, style.css) →
unstyled app. B13 fixed our local icon; this adds a @guardian_assets proxy
fallback to :8177 so the guardian's own /assets/* resolve. Verified live on
.116: /app/fedimint/assets/bootstrap.min.css 404→200 text/css. (needs
archy-fedimint-ui image rebuild to persist on nodes.)
- Home.vue: Quick Start Goals card regained lg:col-span-2 so it fills its row
on desktop instead of sitting at half width.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
The whole fleet was silently never reaching the FIPS mesh: the default
public anchor was configured as fips.v0l.io:8668/udp, but the anchor only
answers on TCP/8443. Fix the default to 185.18.221.160:8443/tcp (IPv4
literal — the hostname resolves IPv6-first and the daemon binds v4-only,
which fails the handshake with EAFNOSUPPORT), and auto-seed it in
anchors::load() so every node dials it without operator action (removal
still persists). Proven live on .116: cold start → anchor_connected in
~400ms, anchor became mesh parent.
Wire fips::update::apply() against upstream GitHub releases (stable
channel only): resolve /releases/latest → SHA256-verify the .deb against
checksums-linux.txt → install → restart. dpkg runs via `systemd-run` to
escape archipelago's ProtectSystem=strict sandbox (else /var/lib/dpkg is
read-only), with --force-confold (archipelago manages /etc/fips conffiles)
and --force-downgrade (dev builds sort newer than the stable tag).
Validated live: .116 upgraded 0.3.0-dev -> stable v0.3.0.
Also: standalone fips-ui dashboard app (apps/fips-ui + docker/fips-ui,
static nginx proxying /rpc/v1 same-origin, copiable own-anchor address);
reserve UI port 8336; register fips/fips-ui as platform-managed. Includes
the Lightning wallet cross-origin (CORS) + LND proxy auth + nginx
self-healer fix so the wallet screen connects instead of "failed to fetch".
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
The LND UI container was unreachable on .228 after the v1.7.43-alpha
deploy because three sources of truth disagreed on which port nginx
listens on inside the container:
- docker/lnd-ui/nginx.conf listen 8081
- docker/lnd-ui/Dockerfile EXPOSE 8080
- apps/lnd-ui/manifest.yml host networking, ports: []
- scripts/first-boot-containers.sh -p 8081:8080
- scripts/deploy-to-target.sh -p 8081:80 (de-facto)
- scripts/deploy-tailscale.sh -p 8081:80
- scripts/container-specs.sh SPEC_PORTS=8081:80
Result: podman published host 8081 to container port 80, but no one was
listening on 80 inside, so connections were reset. Canonicalize on
container:80 with host:8081 publish, matching the three deploy paths
already in agreement.
Changes:
- docker/lnd-ui/nginx.conf: listen 8081 -> listen 80
- docker/lnd-ui/Dockerfile: EXPOSE 8080 -> EXPOSE 80
- apps/lnd-ui/manifest.yml: replace host-network (never true) with
bridge networking and explicit 8081:80 port mapping, correcting a
documentation-vs-reality mismatch
- scripts/first-boot-containers.sh: -p 8081:8080 -> -p 8081:80, and
fix the internal-port comment
Verified on .228 after rebuild: curl http://127.0.0.1:8081/ returns HTTP
200 and the /app/lnd/ host-nginx proxy resolves cleanly.
Replaces the first-boot-containers.sh sed/envsubst approach with a
Rust-native render step bound into the ContainerOrchestrator lifecycle.
- New container::bitcoin_ui module: embeds the nginx.conf template via
include_str!, reads the plaintext RPC password from
/var/lib/archipelago/secrets/bitcoin-rpc-password, substitutes
{{BITCOIN_RPC_AUTH}} with base64(archipelago:<password>), and atomic-
writes (tmp + rename) to /var/lib/archipelago/bitcoin-ui/nginx.conf.
Idempotent: byte-compares before writing so unchanged input is a
no-op (no inode churn, no restart cascade).
- ProdContainerOrchestrator gains run_pre_start_hooks(app_id) returning
HookOutcome::{Rewritten, Unchanged}. Fires in install_fresh before
create_container, and in ensure_running: on Running + Rewritten
triggers a restart; on Stopped re-renders then starts.
- bitcoin-ui Dockerfile no longer COPYs a default.conf; the file now
arrives via runtime bind-mount of the rendered config. If the bind-
mount is ever missing, nginx starts with no site configured and
returns 404 everywhere — safe failure vs. serving upstream RPC with
a stale Authorization header.
- apps/{bitcoin,electrs,lnd}-ui/manifest.yml land as first-class
manifests. bitcoin-ui declares the bind-mount target and a dependency
on bitcoin-core; electrs-ui and lnd-ui declare their own deps and
health checks.
- 8 new unit tests on the render fn (idempotency, rotation, trimming,
missing/empty secret, template invariants) plus an integration test
asserting install(bitcoin-ui) actually lands a substituted nginx.conf
on disk via the hook. 39/39 container:: tests pass
(test_parse_image_versions pre-existing failure unchanged, out of
scope).
- auth.rs now infers onboarding-complete from setup_complete + password_hash so
nodes stop bouncing users through the intro wizard after browser clear / update
/ reboot; the flag self-heals to disk on next check
- frontend: "backend uncertain" no longer defaults to /onboarding/intro —
useOnboarding returns null + callers poll / retry instead of flashing the wizard
- login sounds (synthwave, welcome voice, pop, whoosh, oomph) gated by
isFirstInstallPhase(); typing sounds unaffected
- removed FIPS app, Nostr Relay, Nostr VPN, Routstr, Penpot from catalog,
frontend config, Rust AppMetadata + install dispatch + install_penpot_stack;
docker/fips-ui + docker/nostr-vpn-ui + apps/penpot dirs and 5 icons deleted;
15 image versions deleted from tx1138, .168, gitea-local registries (.160
Gitea was 502 at release time — follow-up)
- AIUI baked into frontend release tarball via demo/aiui/; deploy-to-target
falls back to demo/aiui/ when the AIUI sibling checkout is missing
- prebuild hook syncs app-catalog/catalog.json → public/catalog.json so the
two copies can no longer drift (was the source of the "apps still visible"
bug — public/ had stale data)
Co-Authored-By: Claude Opus 4.7 (1M context) <noreply@anthropic.com>
Install flow
- api/rpc/package/install.rs: always append the literal image URL as a
last-resort pull candidate in do_pull_image, so images not carried by
any configured mirror (docker.io/bitcoin/bitcoin:28.4) still install
instead of masquerading as a generic pull failure across every mirror.
- api/rpc/package/install.rs: write_bitcoin_conf now skips on any stat
error, not just "file exists". Once bitcoin-knots' first-boot chowns
/var/lib/archipelago/bitcoin into the container's user namespace (700
perms, UID 100100/100101), the archipelago daemon can't even traverse
in — try_exists returns Err which unwrap_or(false) treated as "not
present" and drove a doomed write. Now errors out of the directory
traversal are treated as "conf already owned by container user" and
the write is skipped. Mirrors the lnd.conf pattern.
- api/rpc/package/install.rs: drop the hardcoded `prune=550` from the
conf default. Operators with multi-TB drives shouldn't be silently
pruned; users who want a pruned node can set it in bitcoin.conf
themselves. Full archive is the only honest default.
- api/rpc/package/config.rs: bitcoin-core now passes explicit
-server/-rpcbind/-rpcallowip/-rpcport/-printtoconsole/-datadir CLI
args. Vanilla bitcoin/bitcoin:28.4 has no entrypoint wrapper and
reads conf + argv only; without these the RPC listens on 127.0.0.1
inside the container and rootlessport can't reach it, so the
bitcoin-ui companion gets 502 on every /bitcoin-rpc/ call.
Bitcoin Knots keeps its own entrypoint-driven defaults.
- container/docker_packages.rs: split bitcoin-core out of the shared
AppMetadata arm. bitcoin-core now surfaces as "Bitcoin Core" with
bitcoin-core.svg and a Reference-implementation description; the
bitcoin + bitcoin-knots ids keep the Knots branding. Fixes the home
card showing "Bitcoin Knots" for a Core install.
Bitcoin node UI (docker/bitcoin-ui)
- index.html: impl name/tagline/logo now dynamic. applyImplBranding()
reads subversion from getnetworkinfo — /Satoshi:X/Knots:Y/ resolves
to Bitcoin Knots, plain /Satoshi:X/ resolves to Bitcoin Core. Both
get their own icon and subtitle. Settings modal replaced its
hardcoded Regtest/txindex=1/port-18443 placeholders with live values
from getblockchaininfo + getindexinfo + getzmqnotifications.
- index.html: new Storage info card (Full Archive · X GB /
Pruned · X GB from blockchainInfo.pruned + size_on_disk) visible on
the main dashboard, same level as Network. Settings modal mirrors it
with the prune height when applicable.
- Dockerfile + assets/: bitcoin-core.svg, bitcoin-knots.webp, and the
bg-network.jpg used by the dashboard are now COPY'd into the image
under /usr/share/nginx/html/assets. Previously the <img src> pointed
at paths that 404'd into the SPA fallback and the onerror handler
hid the broken logo silently.
Frontend
- appSession/appSessionConfig.ts: add bitcoin-core to APP_PORTS (8334),
HTTPS_PROXY_PATHS (/app/bitcoin-ui/), and APP_TITLES (Bitcoin Core).
Without these the AppSessionFrame showed "No URL found for
bitcoin-core" and the home/app-list title fell through to the raw id.
- settings/AccountInfoSection.vue: backfill What's New entries for
v1.7.31 through v1.7.37 that had been missed in earlier cuts.
Release plumbing
- releases/v1.7.37-alpha/: binary + frontend tarball.
- releases/manifest.json: v1.7.37-alpha, sha256/size refreshed.
- Cargo.toml / package.json: version bumps.
Co-Authored-By: Claude Opus 4.7 (1M context) <noreply@anthropic.com>
All hardcoded references to the old IP-based registry replaced across
Rust backend, Vue frontend, shell scripts, Dockerfiles, CI, and docs.
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
Backend: cache status in RwLock, refresh every 15s via background task.
Eliminates per-request TCP race to ElectrumX that caused volatile errors.
Fix error classification so "Failed to read" is transient, not hard error.
Frontend: keep last-known-good data across failed polls, persist Tor
onion once discovered, adaptive polling (5s active / 30s synced).
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
- Replace aardvark-dns container names with host.containers.internal
for all cross-app connections (LND→Bitcoin, ElectrumX→Bitcoin,
Mempool→ElectrumX, Fedimint→Bitcoin, NBXplorer→Bitcoin P2P+RPC)
- Add BTCPay multi-container stack installer (postgres + nbxplorer +
btcpay-server) with proper secrets, data dir ownership, NOAUTH
- Add Mempool multi-container stack installer (mariadb + mempool-api +
mempool-frontend) with host.containers.internal for RPC
- Immediately remove apps from state on uninstall (no 3-min ghost delay)
- Include archy-bitcoin-ui in bitcoin uninstall container list
- Fix LND UI port 8081 (was 8080, conflicting with LND gRPC)
- Fix ElectrumX UI: proxy /electrs-status to backend, cache-busting
headers, graceful fallback when backend returns HTML
- Add Tor hidden services for ElectrumX and LND in torrc template
- Remove unused detect_bitcoin_container_name() (replaced by
host.containers.internal)
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
Add three new marketplace apps:
- Routstr (v0.4.3): Decentralized AI inference proxy with Cashu payments
- Nostr VPN (v0.3.4): Mesh VPN with Nostr signaling + WireGuard tunnels
- FIPS (v0.1.0): Self-organizing encrypted mesh network
Includes status UI dashboards for headless apps (nostr-vpn-ui, fips-ui)
with usage instructions, node identity display, and container logs.
Nostr identity injected via env vars for all three apps.
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
Container stability:
- Merge scan results instead of full replacement (prevents UI flapping)
- Absence threshold: 3 consecutive missed scans before removing from state
- container-list RPC uses cached scanner state for consistency
- Increased Podman API timeout 30s → 60s (scanner + health monitor)
- Keep crashed containers visible as "exited" instead of podman rm -f
- Resolve host-gateway IP via ip route (podman 4.3.x compatibility)
ISO build fixes:
- AIUI web app inclusion: searches 5 paths + CI step to copy from build server
- Claude API proxy: systemctl enable with symlink fallback
- AIUI nginx: try_files =404 (was /aiui/index.html redirect loop)
- Build version set to 1.3.0
Container fixes:
- lnd-ui: nginx listens on 8080 (was 80, Permission denied in rootless)
- first-boot: image-versions.sh sourced from correct path with validation
- first-boot: host-gateway resolved to actual gateway IP
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
- session.rs: use OnceCell for remember_secret to prevent concurrent
requests on first boot from generating different HMAC secrets, which
caused CSRF token mismatch on every state-changing RPC call (app
install, start, stop all failed with "CSRF token missing or invalid")
- install.rs: write lnd.conf with Bitcoin RPC credentials before LND
container starts (prevents "bitcoin.mainnet must be specified" crash);
inject Bitcoin RPC auth into bitcoin-ui nginx.conf; add proper error
logging to UI container build/run steps; fix UI containers to use
--network=host (they proxy to localhost backend/bitcoin RPC)
- Tor: remove After=tor.service from archipelago-tor-helper.path to
break systemd ordering cycle that prevented Tor from starting on boot
- Seed screen: compact grid layout (2 cols mobile, 4 cols sm+) with
tighter padding to fit kiosk displays without scrolling
- Dockerfiles: remove nonexistent assets/ COPY from bitcoin-ui, fix
electrs-ui to COPY qrcode.js and EXPOSE 50002 (matches nginx.conf)
- image-versions.sh: add UI container image variables for registry
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
Critical: headless services (Bitcoin, LND, Electrumx) need companion
UI containers that serve web dashboards. These were only built for
Bitcoin, and only on bundled ISO builds.
Changes:
- install.rs: auto-build UI containers for LND (port 8081) and
Electrumx (port 50002) in addition to Bitcoin (port 8334)
- build-auto-installer-iso.sh: always bundle docker UI source files
(was skipping for unbundled builds — they're tiny HTML, not images)
- Dockerfiles: fix nginx base image tag 1.29.6→1.27.4 (matches registry)
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
All container image references now pull from 80.71.235.15:3000/archipelago/
instead of Docker Hub and ghcr.io. image-versions.sh is the single source
of truth; all scripts use $*_IMAGE variables instead of hardcoded refs.
Files updated:
- scripts/image-versions.sh: central ARCHY_REGISTRY variable
- core/*/config.rs: registry whitelist includes app registry
- core/*/stacks.rs: Immich + Penpot stack images
- scripts/{first-boot,deploy-to-target,container-specs}.sh: use variables
- docker/*/Dockerfile: nginx base image from registry
- image-recipe/: ISO build, podman config, menu script
- scripts/{container-doctor,deploy-bitcoin-knots,fix-indeedhub,validate-app-manifest}.sh
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
- BUG-33: CPU load alert threshold increased from 2x to 4x core count
(8→16 on 4-core machine) to reduce false alerts during container ops
- TASK-27: Launch buttons for new-tab apps now show external link icon
(BTCPay, Grafana, PhotoPrism, Portainer, OnlyOffice, etc.)
- TASK-36: Iframe error screen now distinguishes between X-Frame-Options
blocked vs container not reachable, with appropriate messaging
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
When ElectrumX is indexing and can't accept TCP connections, the UI
now shows the actual index size (e.g. "126.9 GB") in the Indexed
Height field instead of a generic "Building..." label. Also shows
the size in the status message for better progress visibility.
Updated estimated full index size from 55GB to 130GB (2026 mainnet).
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
- Bitcoin UI nginx: use __BITCOIN_RPC_AUTH__ placeholder, injected at
deploy time from secrets file (fixes auth prompt regression)
- Deploy script: sed-replaces placeholder with real base64 RPC creds
before building bitcoin-ui Docker image
- Container state: "created" → "stopped" (not "starting") so ollama/
tailscale show correctly
- Comprehensive INSTALLED_ALIASES for marketplace
All container credentials now flow from secrets files through the
deploy script. Manual container recreation is no longer needed.
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
- Fix .onion address overflow: add min-width:0 to flex children
- Reduce field font size for long addresses
- Auto-select Local Network mode when Tor unavailable
- Fix Tor hidden service paths on Arch 1/3 (was /var/lib/tor/,
backend reads /var/lib/archipelago/tor/)
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
When tor_onion is null in the connect info response, automatically
switch dropdown to "REST (Local Network)" and show a helpful message
instead of "Tor not configured for LND" error.
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
- fetchConnectInfo: use window.location.protocol instead of hardcoded http://
- getBackendUrl: default to current origin when no ?backend= param
- Fixes mixed content errors on HTTPS Tailscale servers
- Also fixed: nginx needed reload on Tailscale servers, Arch 2 missing
/lnd-connect-info nginx location
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
- LND UI: replace cdn.tailwindcss.com with local tailwind.css (CSP fix)
- LND UI: make asset paths relative for nginx proxy compatibility
- Web5 wallet: add QR code for on-chain receive addresses (qrcode npm)
- Web5 wallet: hide incoming transactions after 3 confirmations
- Apps: add "Services" tab to separate backend containers from user apps
- Home: null guard on packages.value to prevent TypeError on load
- First-boot: auto-create Bitcoin Knots wallet (no longer auto-created)
- AppSession: add mempool-electrs to port mapping
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
- Add electrs to marketplace as standalone installable app
- Add dependency check: refuse install if no bitcoin node is running
- Use container DNS (bitcoin-knots:8332) on archy-net instead of host IP
- Auto-create bitcoin.conf with txindex + RPC on bitcoin-knots install
- Auto-build and start electrs-ui container post-install
- Show index size and estimated progress during initial sync
- Add /electrs-status and /health nginx proxy routes
- Remove Tailwind CDN from electrs-ui, use inline styles
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
- Upgraded Fedimint version to v0.10.0 in docker-compose.yml and manifest.yml, adding support for the built-in Guardian UI.
- Modified .gitignore to exclude deploy-config.sh script.
- Enhanced onboarding process in AuthManager to persist onboarding state and validate password strength during user setup.
- Updated API to handle onboarding completion and password change requests, ensuring a smoother user experience.
- Improved configuration management to support Nostr discovery and Tor proxy settings, enhancing node identity features.
- Updated BUILD-GUIDE.md to clarify instructions for building the Archipelago Auto-Installer ISO, emphasizing the recommended method of building directly on the target server.
- Added auto-installation of missing dependencies (xorriso, podman) when running the build script with sudo.
- Enhanced the build-auto-installer-iso.sh script to capture container images from the live server, ensuring the ISO includes the same set of applications as the dev server.
- Revised deployment documentation to stress the importance of building the Rust backend on the Linux dev server and included new instructions for capturing system-level changes for ISO builds.
- Improved UI components and added new bundled applications (BTCPay Server, Mempool Explorer, Nostr Relay, Strfry Relay, Tailscale) to enhance user experience.
- Updated the glass-card and glass-button styles for improved aesthetics and functionality, including gradient borders and hover effects.
- Introduced new info-card and info-card-button components with enhanced styling and interactive features.
- Refactored existing HTML structure to utilize new card components, improving consistency across the UI.
- Enhanced button interactions for better user experience during settings and logs access.
- Updated BUILD-GUIDE.md to streamline instructions for building the Archipelago Auto-Installer ISO, including prerequisites and post-installation steps.
- Added detailed sections on capturing the live server state and building from source.
- Enhanced Docker and Podman integration in build scripts for improved backend and web UI capture.
- Introduced new app metadata for "IndeedHub" in the Docker package scanner and updated UI components for better installation progress tracking.
- Improved styling and functionality in the Bitcoin UI for a more cohesive user experience.
