The RF section shipped as four bare fields; restore a prepopulated plan
list (dropdown) with Custom unlocking free entry, per operator direction.
Preset labels carry the full values, so the number fields render only in
Custom mode — no duplicated display. Presets limited to verifiable
sources: the repo's MeshCore community plans (EU 868/433), the MeshCore
firmware's own build defaults (platformio.ini arduino_base 869.618/62.5/
SF8 CR5; companion example 915.0/250/SF10/CR5), and the operator-attested
Portugal plan (869.618/62.5/SF8/CR8). Stored params are matched back to a
named preset on load; hand-editing flips the dropdown to Custom.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Plugging in a LoRa radio now pops a global two-step setup modal on any
page: step 1 shows the ACTUAL detected board (25 board SVGs vendored
from the Meshtastic web-flasher, GPL-3.0; matched by USB product string
on native-USB boards, vid:pid heuristics for bridge chips, animated
fallback otherwise); step 2 configures with Archipelago presets — the
LoRa region pre-selected from the node's location (new lat/lon→region
mapping), channel 'archipelago', node name, and an advanced firmware
pin. Options adapt per protocol: region+channel program Meshtastic;
MeshCore shows its community frequency plan (firmware owns RF); RNode
defers to the Reticulum daemon config.
Backend: mesh.configure now accepts lora_region (validated against the
driver's region table) and device_kind (probe pin); mesh.status returns
the persisted values plus per-port USB identity (sysfs vid/pid/product)
for board identification. The Mesh Device tab gains a full settings
form (region with duty-cycle/legality hints, firmware pin, channel,
name, identity broadcast) replacing the read-only panel; the old
Mesh-page-only onboarding modal is superseded by the global flow.
Mock backend: stateful mesh config so the dev UI demos the full
detect→configure round-trip (disable mesh → modal fires with Heltec V3).
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
