First lookups fire before the phone's tree position settles and are
doomed; at 10s completion timeout each one cost 10s before the 1s
retry could fire (observed 19s to a route on a fresh 5G join, session
3ms after the route — discovery convergence was the whole cost).
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Stock fips pacing is tuned for always-on routers: a failed discovery
backs off 30s, session resends gap out to 8-16s, dead links redial at
5s→300s. On a phone that stacked into a 40s+ first connect over
cellular. Config-only tuning in build_config (no fork changes):
discovery backoff 1s (cap 30s), session resends 400ms x1.5 (10 max),
link redial 1s (cap 30s). Measured on-device: anchor +1.2s, node
session +5.4s from cold start over 5G.
Ops note: vps2 anchor daemon had degraded again (multi-second link
RTTs after 15h uptime) — restarted, recycle tightened 1d → 6h.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
A pairing QR minted while the node UI was browsed over the mesh carried
npub….fips as fhost. Android's system DNS can't resolve .fips, so every
direct handshake dial failed and first connect crawled through public-
anchor discovery (2m35s observed) instead of one LAN hop.
- node UI: resolveServerUrl treats .fips names and IPv6 ULA literals as
phone-unreachable and substitutes the node's LAN IP (same guard as
tailnet/localhost)
- app: QR parser falls back to the url param's host when fhost is .fips
- app: peer store never keeps .fips dial addresses
- app: peer aliases slugged for the fips host map (spaces dropped
"Framework PT"/"Mesh anchor" from name resolution entirely)
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
The gesture-nav strip below the in-app browser's control bar was painted
black by inset padding, but painted-only areas don't consume touches in
Compose — stray taps fell straight THROUGH the overlay into the kiosk's
tab bar behind it (accidentally opening the AIUI chat tab). The strip is
now an explicit Box: solid black AND click-swallowing. Bottom inset
moved off the Column padding so the shield can own that region.
Served APK: 0.5.11 (vc31).
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
- SendBitcoinModal crashed AT MOUNT on device ('Cannot access R before
initialization'): the invoice-first block's watch() evaluates its
computed source at setup, which read effectiveMethod while still in
its temporal dead zone (declared 20 lines later). Send button did
nothing and the failure poisoned sibling modal data. Block moved below
effectiveMethod, with a comment so it can't drift back.
- Cold start injected 0px safe-area vars (onPageFinished can beat window
attachment; rootWindowInsets null) — UI lost top/bottom margins and
the tab bar sat in the gesture zone eating taps. Injection extracted
to injectSafeAreaVars(), re-fired from an OnApplyWindowInsetsListener
when real insets arrive, on page finish, and on reattach.
- MeshLoadingScreen wears the proper brand: pixel 'a' in the black
circle-container + F*CK IPS MESH wordmark.
Served APK: 0.5.10 (vc30). Reproduced+diagnosed live on-device.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Everything from tonight's remote field testing:
- Back-to-dashboard fixed: JS bridges on the retained WebView delegated
through live-composition callbacks (stale closures made apps refuse to
launch after remote ⇄ dashboard), and reattach forces a layout pass
(top/bottom UI was wrong until a tap).
- F*CK IPs MESH branded loader: full-screen on relaunch (startup race)
and during the first connect after scanning a node QR.
- Party 'Share this app' is now a QR of the public vps2 download link
(scan with any camera → install over any internet); direct APK
file-share kept as a secondary action.
- Mesh party pairing is MUTUAL: scanner announces itself to the scanned
phone's Flare /hello — both sides get the peer, a chat entry and a
'👋 joined the party' message; scanner auto-opens the chat.
- Party scanner asks for CAMERA permission (fresh installs/reinstalls
landed on a black preview).
- Node: device tokens mint unique companion-<id> names — pairing a
second phone no longer revokes the first phone's login (the source of
'reconnecting a lot' and the second phone's failure).
Served APK: 0.5.9 (vc29).
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
- Party screen 'Share this app': shares this install's own APK through
the system sheet (FileProvider over cache/share/), so a nearby friend
gets the companion via Quick Share/Bluetooth with zero internet — the
party-mode premise end to end.
- Intro screen: Mesh Party button under Get Started — party works with
no node at all, so it belongs on the first screen a fresh install
shows.
- Served APK: 0.5.8 (vc28), ready for the QR/OTA/ISO cut.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Combined session state from both agents (shared checkout):
- Mesh Party / Flare (experimental): phone-to-phone FIPS via party QR,
Flare chat/beam on :5680, optional fixed UDP listen (2121); party-only
phones get the baked-in Archipelago anchor so two bare phones reach
each other across the internet, not just on a hotspot.
- Keep-warm mesh: a running healthy node survives app opens (restart
only when dead or peers changed — peersDirty); requestMeshRestart for
config changes. Cold start measured on-device: session in ~3.1s.
- Restored after regression: startup LAN-vs-mesh race (the party work
was based on a pre-#114 file copy) and same-node routing (BTCPay/
Pine/HA had returned to opening in the external browser).
- UI: top status-bar scrim removed (bottom-only bars); web app-session
mobile bar is solid black — app theme colour no longer bleeds through
the bar and its safe-area strip.
Served APK: 0.5.7 (vc27).
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Implements the app-side recommendations from the node diagnosis
(HANDOFF-2026-07-23): first session through the public tree takes 15s+
when it works at all, far beyond the old ~8s probe window.
- connect(): mesh ULA probed inside a 60s budget, 15s per-phase timeouts.
- ArchyVpnService: session warmer probes every saved node ULA as soon as
the tunnel is up (5s cadence first minute, then 60s keep-warm) so the
UI hits a warm session and it never idles out.
- Served APK: 0.5.5 (vc25); handoff updated with 25-ping evidence that
public-tree discovery currently fails outright (supports the
private-tree infra decision).
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
On-device diagnosis (phone on adb, 5G): mesh sessions established but no
packet ever entered the tunnel — Android hands the VpnService TUN fd over
non-blocking, and the fips fork's dedicated blocking-read thread treats
EAGAIN as fatal, dying at startup. archy-fips-core now forces the fd into
blocking mode before Node::start_with_tun_fd. Verified on-device: reader
survives, packets flow into the mesh, and the 30s anchor-link flap is
gone (stable 8+ min on 5G).
Also setMetered(false): Android 10+ defaults VPNs to metered, flipping
the phone into data-restricted behaviour whenever the mesh is up.
Served APK: 0.5.4 (vc24). Handoff updated with the remaining node-side
blocker: phone->anchor works, phone->node ULA gets no reply — needs
fipsctl introspection on Framework PT (suspect fork/daemon session or
routing mismatch).
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
The whole point of FIPS: the phone peers with the node's npub using the
LAN endpoint as a direct p2p dial hint AND rendezvouses via a public
anchor when away — neither LAN nor 5G location may matter. The anchor
half only existed when the scanned QR carried fanchors, so pairing
against an older node left the phone LAN-only and everything died on 5G.
The Archipelago vps2 anchor (npub + 146.59.87.168:8444/tcp, lockstep
with core fips/anchors.rs) is now baked into upsertNodePeer as a
guaranteed peer. Mesh connect retry window widened so a first-ever
pairing survives the VPN consent dialog. Served APK: 0.5.3 (vc23).
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Field test on 5G (Framework PT): pairing scanned fine but connect
hard-failed on the scanned LAN IP, and enabling the mesh VPN killed the
phone's internet.
- ArchyVpnService: the TUN is IPv6-only, and Android blocks every
address family the VPN holds no address for — allowFamily(AF_INET)
(+ allowBypass) so normal traffic flows while only fd00::/8 is routed.
- ServerConnectScreen.connect(): when the LAN address doesn't answer and
the entry carries a mesh ULA, bring the tunnel up (autoStartIfReady)
and probe the ULA with retries before reporting failure — the scanned
IP is a dial hint, the npub/ULA is the identity (npub-first contract).
- Served companion APK refreshed as 0.5.2 (vc22); handoff doc updated.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
The APK served from the pairing QR predated today's scanner fixes, so
the download-then-scan flow still hit the laggy scanner. Bumps the
version so phones update in place, refreshes the served artifact
(signed v1+v2+v3, verified), and adds the archi-dev-box deploy handoff.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
- Android/rust/archy-fips-core: leaf-only fips node as a JNI cdylib (fips
pinned to the fips-native fork rev with VpnService fd support), built by
gradle via cargo-ndk (arm64), tested on host
- ArchyVpnService: split-tunnel VpnService routing only fd00::/8 (MTU 1280,
foreground specialUse); FipsManager handles the one-time VPN consent and
silent auto-start — no settings surface at all
- pairing QR now fully configures the mesh: fnpub/fip/fhost/fudp/ftcp plus
fanchors (the node's seed-anchor list, npub@addr/transport) so the phone
can rendezvous through public anchors when the LAN endpoint is unreachable
- default seed anchors gain the two dual-transport join.fips.network test
anchors (23.182.128.74:443/tcp, 217.77.8.91:443/tcp); anchor adverts are
Nostr kind-37195 events
- device token rides the password field end-to-end: backend accepts tokens
wherever it accepts the password, so scan = instant login (WebSocket auth
+ WebView form injection unchanged); token logins skip TOTP
- ServerEntry.meshIp + IPv6-bracketed URLs; WebView retries the mesh address
on main-frame errors, auto-login and origin checks honor it
- companion v0.5.0 (versionCode 20), arm64 abiFilter; FipsNative.available
gates everything so non-arm64 still runs as a plain companion
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Camera decode failed because every lever was at its minimum: the web
modal generated the QR at 112px (~2.5px per module before upscaling),
the analysis stream was CameraX's 640x480 default, and ZXing ran
without TRY_HARDER. Generate the QR at 512px (displayed 192px with a
real quiet zone), analyze at 1280x720, decode with TRY_HARDER plus an
inverted-luminance fallback. v0.4.14 (versionCode 18).
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Companion side of docs/companion-pairing-qr.md (v1 contract):
- Connect screen lands on Scan Node's QR / Enter Manually; NESMenu gains
an add-server-by-QR icon button
- QrScannerOverlay: CameraX + ZXing core (pinned, on-device, no ML Kit)
- ServerQrParser: archipelago://pair?v=1&url=..[&pw=..]; unknown major v
-> 'update the app'; upsert by origin so re-scans never duplicate
- archipelago:// deep link registered (singleTask + onNewIntent) for the
modal's 'Open in companion app' button
- WebView auto-fills and submits Login.vue's password form when a stored
password exists — demo QR is one step to a logged-in session
- Web modal + handoff doc copy synced to the real label: Scan Node's QR
- v0.4.13 (versionCode 17)
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
The 0.4.11 edit affordance only lived on ServerConnectScreen, which a
connected user never sees. Add edit to NESMenu — the settings modal
reached via two-finger hold while connected: a ✎ pencil on each saved
server opens the form pre-populated (Edit Server header + Cancel),
persists via ServerPreferences.updateSavedServer(), and reconnects when
the edited server is the live one.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
Add an edit affordance to each saved server in ServerConnectScreen: a
pencil button loads the entry into the form (Edit Server mode) with
Save Changes / Cancel actions. Persisted via a new
ServerPreferences.updateSavedServer() that replaces by connection
identity (address/port/scheme) and keeps the active record in sync when
the edited server is the active one.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
Companion WebView now supports file inputs and downloads, and apps
opened in the in-app tab get a proper loading splash and a footer
control bar matching the web app-session bar.
- onShowFileChooser wired to an ActivityResultLauncher so <input
type=file> opens the system file browser (kiosk + in-app tab)
- DownloadListener: http(s) via DownloadManager (forwarding session
cookies), blob: via JS->base64->MediaStore, data: decoded inline
- in-app tab: app-icon + progress loading splash (eager favicon
fetch, upgraded via onReceivedIcon)
- footer controls (back/forward/refresh/open/close) matched to the
web AppSession mobile bar, with the same SVG glyphs as drawables
- bump to 0.4.8 (versionCode 12)
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
- InAppBrowser now has a bottom control bar (back/forward/reload/open-in-browser/
close) mirroring the web mobile footer, plus a centered loading screen
(app favicon + progress bar) instead of a bare top bar over black.
- Commit a repo-dedicated debug keystore and pin signingConfigs.debug to it so
every machine — and the published companion download — signs debug builds with
the SAME key (fixes "App not installed" signature-mismatch on update). Force v1+v2.
- Bump versionCode 10→11, versionName 0.4.6→0.4.7.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
Calibrated from a device home-screen screenshot: launcher3 crops less than the
App-info view, so the ring at 0.53 sat ~78% out. Scale 0.65 reaches the edge.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
Ring uses logo.svg's #000->#666 gradient (stroke 22.8834) pushed to scale 0.53
so it sits at the launcher's visible crop edge (calibrated from a device
screenshot). Grid at 0.55. versionCode 9 so launcher3 refreshes its icon cache.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
Device App-info screenshot showed the launcher only renders the central ~54%
of the adaptive icon, clipping the ring. Calibrated the ring to scale 0.50 so it
lands at the visible circle edge; grid to 0.55. Bump versionCode 8 so launcher3
refreshes its icon cache (it keys the cached bitmap by versionCode).
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
applicationIdSuffix=".debug" + versionNameSuffix so a debug/test build
installs alongside the release app instead of failing on signature mismatch.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
1. registries.conf includes docker.io search + fallback 23.182.128.160
2. First-boot pull_with_fallback() tries primary then fallback registry
3. FileBrowser created with noauth config on persistent volume
4. Backend dynamic registries.json pre-created in ISO
5. Filebrowser password secret created for token flow
Fixes: apps stuck at 0% download, filebrowser not working, dynamic
catalog not loading on fresh installs.
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
- RemoteInputScreen: touch/keyboard relay via WebSocket to /ws/remote-input
- Network layer for server communication
- UI components and NES/Neo theme variants
- Updated navigation, server connect, and WebView screens
- Build config and string resources updates
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
