CR-01 fixed web5.lnd-info/web5.networking-profits to persist:false, stopping
FUTURE writes to sessionStorage, but a tab already open before the update
ships reloads in-place onto the new bundle and keeps whatever the OLD
bundle already wrote under the old decision — indefinitely, since nothing
but clearAll() (logout) ever purges a resource: snapshot. Long-lived tabs
(installed PWA, kiosk display) are normal here, so this left updating users
exposed to exactly the T-02-01 exposure CR-01 was meant to close.
- Add a schema-version marker (resource:__schema) checked once at store
setup: absent or stale marker purges every resource:-prefixed
sessionStorage key, then writes the current version. One-time per tab
session (a matching marker no-ops), not per navigation/reload, so this
doesn't defeat the instant-paint-from-snapshot benefit the cache exists
for. CURRENT_SCHEMA_VERSION must be bumped whenever a key's persist
decision changes, documented inline as the contract for future changes.
- Extract clearAll()'s purge loop into purgeAllSnapshots(), reused by both
clearAll() (logout, T-02-02) and the new migration, so there's one place
that enumerates/removes resource: keys.
- Close the residual refresh()/useCachedResource() default: opts.persist
?? true was the exact footgun that caused CR-01 (a call site silently
opting into persistence by omission). persist is now a required
parameter on refresh() and useCachedResource()'s options, matching the
entry()/optimistic() hardening WR-04 already applied.
- Tests: legacy snapshot (no/stale marker) is purged on init; a snapshot
under the current marker survives a later init (proves one-time, not
every-boot); persist:false never writes a snapshot; marker is written
after purge; purge is strictly bounded to the resource: prefix (seeded
non-resource: sessionStorage keys and a localStorage auth flag survive
byte-for-byte); migration cannot race an in-flight fetch (runs
synchronously at store setup, before entries/inflight can hold anything).
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
entry(key, persist = true) and optimistic(key, update) silently defaulted
to persist:true after the first call for a key, and optimistic() didn't
accept a persist argument at all. Every current call site happened to be
safe, but the invariant was unenforced: a future caller invoking
store.optimistic() before any useCachedResource({persist:false}) has run
for that key in the same tick would silently start writing to
sessionStorage with no indication anything is wrong (T-02-01).
persist is now a required argument on both functions (no default), and the
per-key decision is recorded and asserted (dev-only warning) against any
later call that disagrees. useCachedResource's optimistic() wrapper now
threads its own already-resolved persist value through automatically, so
no existing composable caller changes behavior. The two call sites that
use the resources store directly (Cloud.vue/PeerFiles.vue's per-peer
browse cache) now pass persist:true explicitly, matching their existing
behavior exactly.
Co-Authored-By: Claude <noreply@anthropic.com>
- System stats (homeStatus.refresh), update status and cloud storage usage
are now every-entry, TTL-gated useCachedResource entries (10s/300s/30s),
hosted in Home.vue rather than inside the homeStatus Pinia store — a
store's own defineStore(id, setup) runs in a bare effectScope where
onActivated() silently no-ops (same finding as 02-05's Mesh.vue)
- Wallet is the deliberate exception (T-02-13): a new home.wallet-status
resource wraps the existing loadWeb5Status() composite fetch and
revalidates UNCONDITIONALLY on every activation rather than TTL-gated,
keeps the prior figure rendered throughout, and persist:false (never
written to sessionStorage). hydrateWalletSnapshot()'s separate localStorage
path is untouched.
- Read Web5.vue's two existing resources (web5.networking-profits,
web5.lnd-info) and did NOT share either key: profits is an unrelated
dataset, and lnd-info's own default persist:true (Web5.vue out of this
plan's file scope) would leak balance data via its own independent
refresh cycle regardless of what Home declares, and Home's wallet fetch
is a strictly broader 7-call composite (not the same single-call dataset)
- dedup:true added to all 12 underlying rpcClient calls (Home.vue's wallet
composite + checkUpdateStatus, homeStatus.ts's 5 status calls)
- RefreshIndicator wired next to the Home header, bound to the wallet
resource's loadState
- The websocket wallet-push path and hydrateWalletSnapshot's pre-network
paint are both left exactly as 02-04 placed them
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
- Mesh.vue: six useCachedResource entries wrap mesh.refreshAll(),
transport.fetchStatus(), refreshFederationNodes(), refreshSelfOnion(),
refreshSelfDid() and refreshContacts(), each with an explicit TTL
(10s reachability/transport, 30s federation/contacts, 300s self
DID/onion) and persist decision (T-02-01: every group carrying peer
or self identity data is persist:false; only aggregate transport
status may persist)
- armMeshLive's Promise.all fan-out becomes a single Promise.allSettled
over refreshMeshGroupIfStale() per group, so a revisit inside TTL
issues zero RPC, a stale revisit revalidates concurrently (not a
serial chain, T-02-16), and one rejected group never blocks the rest
- RefreshIndicator wired into the Mesh header, driven by whether any of
the six groups is refreshing — visible while peer reachability
revalidates on re-entry so a resumed tab never shows a frozen
reachability state as current (T-02-13)
- dedup: true added to every underlying rpc-client.ts/mesh.ts/
transport.ts fetcher call backing the six groups
- useCachedResource() calls live in Mesh.vue rather than inside
stores/mesh.ts or stores/transport.ts: Pinia's defineStore(id, setup)
runs in a bare effectScope, not a component instance, so the
composable's internal onActivated() would silently no-op there; the
fetchers still wrap the stores' own actions unchanged, so those
actions' other callers (clearAllMesh, setMeshOnly, the pre-send
balance check) keep their guaranteed-fresh, uncached reads
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
- resources.ts: clearAll() drops memory entries, in-flight/revalidator/
invalidate-timer bookkeeping, and every resource:-prefixed sessionStorage
key; a generation counter stops an in-flight fetch that resolves after
clearAll from repopulating memory or sessionStorage (T-02-02)
- auth.ts: logout() calls clearAll() in the finally path so a failed
server-side logout still leaves no cached payload behind locally
- resourcesClear.test.ts: covers all five required behaviors plus the
generation-guard fix
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Unread badges came back on every visit (framework showed a phantom "2"
with nothing new): unreadCounts was memory-only, so each page load
replayed the entire message history as "new". Seen-state now persists
as a per-contact highest-seen-message-id watermark in localStorage
(ids are backend-monotonic across restarts); first run after this
ships seeds the watermark from history so nobody gets a wall of stale
badges. Opening a chat advances and persists the watermark for all
twins of the merged conversation.
The hop-route modal the user asked for is now reachable from a visible
per-message "⋯" button (the transport pill remains clickable too), has
a fallback title/branch for messages that predate transport tracking,
and animates: endpoints and link reveal in sequence, a pulse travels
the link, and relay dots blink in order — all disabled under
prefers-reduced-motion.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Replaces the external flasher.meshcore.co.uk link with a button that
opens the global device-setup modal directly at its flash step, via a
new manual entry point in the mesh store (flashFlowPath). Manual opens
target the connected radio (else the first detected stick), skip the
read-only probe — the port is held by the live session and a second tty
opener corrupts it; the backend flash job stops the listener itself —
and close the modal instead of stepping back to the detection screen.
Button is disabled with a hint when no radio is present.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
- Image quality modal: 'Send via' pills (LoRa / FIPS / Tor) when the
peer is federation-reachable — mesh.transport-advice now returns
has_fips + last_transport alongside has_tor. Picking FIPS/Tor routes
the image over the content-ref path instead of the radio.
- Attachment modals (transport chooser, image quality, new hop modal)
Teleport to body so the backdrop dims the FULL viewport — rendered
in-place they sat inside a transformed glass panel that trapped
position:fixed to the right chat panel.
- Click a message's transport pill → route modal: radio hops + live
SNR/RSSI quality for LoRa transports, overlay/circuit shape for
FIPS/Tor, delivery + E2E state.
- Reactions move behind a compact 'React ▾' dropdown with a larger
12-emoji palette.
- Unread badges now clear like a normal chat app: opening a contact
clears ALL twins of the merged conversation (badge sums every
contact_id — clearing just the clicked one left it stuck), and only
once the chat has scrolled to the latest messages; scrolled up into
history, new arrivals accumulate until you scroll back down.
- Refresh button shows only the spinner while refreshing (text+spinner
overflowed the fixed button width).
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Both sides independently fixed the serial-alias dedup and the ESP32
boot-reset races; kept the branch's defer-to-auto-detect for unpinned
preferred paths (single probe pass per cycle) on top of main's
advert-name threading, Reticulum name propagation and radio-first
routing. Modal keeps main's 'Set Recommended' naming + probe progress
bar alongside the branch's in-app firmware flasher step.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
- Refresh button: real handler — calls the new mesh.refresh (radio
re-query) plus contacts/federation/outbox re-reads, disabled with a
spinner while running (was an unawaited cache repaint with no feedback
that skipped half the list's data sources).
- Broadcast button: success ('Sent ✓') and failure states with the error
in the tooltip; failures no longer vanish as unhandled rejections.
- The store's 5s status poll no longer wipes the error banner each tick.
- Contacts/aliases, federation nodes and the outbox badge refresh every
~30s (were mount-only and went permanently stale).
- Peer-list empty state keys on the merged list, so federation rows and
the channel rows still render with no radio attached.
- Device setup modal: 'Set Recommended' naming, probe progress bar with
stage labels instead of an anonymous spinner.
- Device panel: name save clears properly (empty = fall back to server
name) and the confirmation reflects the new live apply.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Bridge WebSocket patches into the resource layer: a /peer-health/<onion>
patch invalidates that peer's cloud.peer-browse entry and the federation
node list; /package-data patches invalidate the tor-services list.
invalidate() debounces 800ms and refetches only keys with mounted
subscribers, so patch storms cost one revalidation per key; the 30s
staleness reconciliation remains the backstop for unmapped data.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Part B3 of docs/FIPS-UPTIME-AND-UI-STATE-PLAN.md — the worst
fetch-on-every-navigation offender converted to the cached-resource layer:
- section counts / peer nodes / my files / paid items are cached resources:
revisits paint instantly, refresh happens behind the content
(sticky-ready), errors keep last-known data
- peer files: per-peer cached browse entries replace the all-or-nothing
Promise.allSettled — each peer's rows render the moment it answers, with
"still fetching from N peers" + unreachable counts; browse-peer runs
with maxRetries:1 so one dead peer costs its timeout once, not ×3
- peer cards get a live transport badge (FIPS green / Tor amber, with
measured latency) from the transport field the browse response already
carried — the per-peer FIPS-uptime view, for free
- cloud store: per-path listing cache with stale-while-revalidate
navigate() and a last-wins guard; CloudFolder no longer reset()s the
store on every folder entry (that wipe forced a spinner each time)
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Part B1+B2 of docs/FIPS-UPTIME-AND-UI-STATE-PLAN.md. Foundation for pages
that render instantly from cache on revisit and revalidate in the
background, instead of unmount-refetch-spinner on every navigation.
- stores/resources.ts: keyed {data, loadState, fetchedAt, error} entries
with sticky-ready (never regress ready→loading), keep-last-value on
error, per-key in-flight dedup, sessionStorage snapshot hydrate,
debounced invalidate() fan-out, optimistic-update-with-rollback
- composables/useCachedResource.ts: SWR hook over the store — synchronous
hydrate, TTL-gated background revalidate, revalidate-on-focus,
abort-on-unmount fetcher signal
- rpc-client: AbortSignal support (aborts pending retries too), opt-in
in-flight dedup keyed method+params, per-call maxRetries override
- 10 tests covering the SWR semantics
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
detected_device_info now carries plugged_at (the /dev node's creation
time; udev recreates it per plug). Dismissals store (path -> plugged_at),
so swapping sticks or a fast unplug/replug between status polls can no
longer be suppressed by an old 'Not Now' (v1 path-only dismissals are
abandoned wholesale).
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Plugging in any LoRa radio now surfaces the device setup modal EVERY time
(dismissals clear on unplug; works while mesh is enabled; 2-poll debounce
so ordinary reconnect blips don't flash it), showing what's currently on
the stick before anything is written:
- mesh.probe-device RPC: identifies the firmware read-only in the same
Reticulum->Meshcore->Meshtastic order as auto-detect. Meshtastic yields
region/modem-preset/channels (want_config is a read); MeshCore yields
name/node-id + firmware version via the previously-unused
CMD_DEVICE_QUERY; RNode via the bare KISS DETECT (no daemon spawn).
Path must be a detected candidate port; the live session's port refuses.
- "Keep As Is": manage_radio=false persists in MeshConfig and the session
skips every on-connect config write (region, channel, PHY params, advert
name) — the radio runs exactly as flashed, hot-swappable.
- "Set Up with Archipelago Settings": second screen shows the params that
will be applied (channel, region, the node's persisted RF params - e.g.
the validated Portugal preset - with the per-region community plan as
fallback) before writing anything.
- Stale-type fix: disconnect now resets device_type/firmware_version, so
a swapped stick no longer shows the previous radio's firmware; probed
kind pins device_kind so the right probe runs first on connect.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Regression: only X-Frame-Options apps were routed to the companion's
in-app WebView; iframeable apps fell through to the iframe session, which
is slower on the phone and loses the native back/forward/reload controls.
Now any launch inside the companion (ArchipelagoNative.openInApp bridge
present) goes to the WebView — both openSession and the legacy open()
overlay fallback. Mobile web/PWA keeps the iframe session. With regression
tests.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Device panel gets MeshCore RF fields (frequency MHz, bandwidth kHz, SF, CR)
wired to mesh.configure's validated lora_radio_params; shown only for
MeshCore radios, all-empty leaves the radio's flashed settings untouched.
Human units in the UI, firmware field units on the wire. Per operator
direction the panel's static stat rows duplicating editable fields (name,
region, channel) are dropped — the editable control is the display. Stale
'adjust via a MeshCore client' hints updated: the node programs the radio now.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
3aebbcbb made goal completion require walking the manual steps (running
apps alone no longer finish a goal) but left the store tests asserting
the old auto-complete behavior. Tests now walk the manual step and also
pin the new running-but-not-walked => in-progress case.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Every Lightning setup (Open a Shop, Accept Payments, Run a Lightning Node)
gains a guided path to a working channel:
- New "Fund Your Bitcoin Wallet" step, gated on the blockchain finishing
its initial sync: while syncing it shows a live progress bar with a
counting-down time-remaining estimate; once synced it shows the on-chain
balance and a "Fund Wallet" button that opens the receive modal with a
fresh address, QR, and the Zeus channel limits (min 150,000 / max
1,500,000 sats) noted.
- When the sync finishes while a Lightning setup is mid-flight, a toast
pops with a "Finish setup" link straight back to the wizard (toasts now
support action links). If several setups are in flight, one is chosen —
the shared steps complete the lightning part of any of them.
- Channel steps are Zeus-branded (logo + copy) and land on the Lightning
Channels screen, which now carries an "Open a channel with Zeus" card
that prefills the open-channel modal with the Olympus peer URI, 150k
sats, and private-channel checked. "Get Zeus" links to zeusln.com.
- Setup completion now actually requires walking the manual steps (fund,
open channel, configure) — previously any step whose app was installed
was silently auto-ticked and running apps marked the whole goal done.
- Completion CTAs now go to the app you just set up ("Go to my shop
(BTCPay)" etc.) instead of the generic services list; iframe apps open
in the on-top app overlay.
- On-chain send modal gains a "Send all funds" sweep toggle, backed by
LND's send_all on the backend (amount no longer required when sweeping).
- Demo/mock: bitcoin.getinfo now returns the block_height/sync_progress
contract the UI reads and simulates a ~90s IBD ramp per visitor so the
timer, toast, and fund flow can all be demoed live; channel list data
fixed (status/channel_point/liquidity totals — the panel previously
crashed on the missing status field); sendcoins supports send_all.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
The remote-companion popup fired on a blind 5s timer while the
first-visit dashboard entrance cinematic runs for 8s, so on a fresh
install it appeared mid-reveal and broke the intro. The cinematic now
publishes an introCinematicPlaying flag via the loginTransition store,
and the popup waits for it to clear (plus a 2s grace) before showing.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
The global mesh-detection poll (added for the device-detected modal)
fired on the login page, 401'd, and the session-expired handler
redirected to /login — reloading the page we were already on, forever.
Background polls now run only when authenticated, and a 401 never
redirects when the path is already /login.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Plugging in a LoRa radio now pops a global two-step setup modal on any
page: step 1 shows the ACTUAL detected board (25 board SVGs vendored
from the Meshtastic web-flasher, GPL-3.0; matched by USB product string
on native-USB boards, vid:pid heuristics for bridge chips, animated
fallback otherwise); step 2 configures with Archipelago presets — the
LoRa region pre-selected from the node's location (new lat/lon→region
mapping), channel 'archipelago', node name, and an advanced firmware
pin. Options adapt per protocol: region+channel program Meshtastic;
MeshCore shows its community frequency plan (firmware owns RF); RNode
defers to the Reticulum daemon config.
Backend: mesh.configure now accepts lora_region (validated against the
driver's region table) and device_kind (probe pin); mesh.status returns
the persisted values plus per-port USB identity (sysfs vid/pid/product)
for board identification. The Mesh Device tab gains a full settings
form (region with duty-cycle/legality hints, firmware pin, channel,
name, identity broadcast) replacing the read-only panel; the old
Mesh-page-only onboarding modal is superseded by the global flow.
Mock backend: stateful mesh config so the dev UI demos the full
detect→configure round-trip (disable mesh → modal fires with Heltec V3).
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
484.kitchen, Arch Presentation, Call the Operator, Next Web News
Network, Syntropy Institute, and T-0 were hardcoded web-only bookmark
apps (no manifests/containers). Removed across the frontend app grid /
curated / marketplace / session / launcher data, the backend
AppMetadata table, their icons, and the nginx /ext/ proxy blocks
(external-app-proxies.conf deleted — nothing installed it anymore).
botfights/nostrudel/gitea keep the shared external-app code paths.
Frontend: vue-tsc clean, 672 tests pass, production build verified
clean of the removed slugs. Backend: cargo check clean.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Launching an app (or opening a tx in mempool from Home/wallet/channels) used
to router.push the app-session page in overlay/fullscreen modes, swapping the
page underneath — confusing and lossy. All display modes are now store-driven:
panel renders beside the page, overlay/fullscreen render above it (teleported
to body), and the route never changes. Deep-link paths (/tx/<hash>) ride along
via the launcher's panelPath instead of a route query; closing always returns
exactly where the user was. The app-session route stays for direct links.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Kiosk (backgrounds + FIPS mismatch, one root cause each):
- kiosk service now also waits for the web-ui asset swap (probes a large
bg asset, bounded 60s) — it launched mid-rsync and CSS background 404s
are never refetched, hence blank backgrounds on first boot
- FipsNetworkCard polls every 15s instead of fetching once on mount
- PWA updates auto-apply on the kiosk (localStorage kiosk flag) — an
unattended kiosk could never click 'Update Now' and ran stale bundles
LND App Store:
- catalog icon pointed at lnd.svg which doesn't exist (lnd.png does);
store card also retries the sibling extension before the placeholder
- image pulls retry once after fast transient failures (<30s) — fresh
first-boot networks reset connections; slow failures aren't retried
so the UI never waits longer than before
Mesh detection:
- mesh.status now always reports device_present + detected_devices
(previously only when the service wasn't running, so the UI couldn't
tell 'no radio' from 'radio present, session connecting')
- Mesh page shows 'Mesh device detected' badge + 'Device detected —
connecting' status for present-but-not-connected radios
- the 99-mesh-radio.rules udev rule was never staged into the ISO tree
(installer searched for it and found nothing) — ship it at the media
root and install it from install-to-disk.sh too
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
The nostr bridge derived the caller from the launcher's own URL and
never checked event.origin, so any co-resident iframe could pull the
node's nostr pubkey or use nip04/nip44 decrypt as an oracle while an
app was open. The bridge now rejects senders whose real origin doesn't
match the open app's origin, and every identity-sensitive method
(getPublicKey, signEvent, encrypt/decrypt) requires user consent or a
remembered per-origin approval — previously only signEvent did.
share-to-mesh in App.vue likewise accepted messages from any sender
and force-navigated to /mesh with an attacker-staged CID; it now
requires same-origin, matching Chat.vue's existing handler.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Fixes from real fresh-install feedback (Framework node .81) + its log bundle:
Backend:
- websocket: subscribe before initial snapshot — broadcasts in the gap were
silently lost, stranding clients on stale state until a hard refresh
(the "everything needs ctrl-r" bug: My Apps stuck Loading, App Store
stuck Checking, containers-scanned never arriving)
- crash recovery: check the crash marker BEFORE writing our own PID —
recovery had never run on any node (always saw its own PID and skipped);
PID-reuse guard via /proc cmdline
- boot status: pending-boot-starts registry (recovery, stack recovery,
reconciler, adoption) — scanner overlays queued-but-down apps as
Restarting instead of Stopped after a reboot; scanner-authored
Restarting resolves immediately on a settled scan (no transitional wedge)
- install deps: bounded wait (36x5s) when a dependency is installed but
still starting ("Waiting for Bitcoin to start…") instead of instant
rejection; dependency-gate rejections remove the optimistic entry (no
phantom Stopped tile) and surface as a notification
- seed backup: auth.setup persists the onboarding mnemonic as the
encrypted seed backup (reveal previously failed on EVERY node — nothing
ever wrote master_seed.enc); seed.restore stashes too; error sanitizer
lets seed/2FA errors through instead of "Check server logs"
- lnd: bitcoind.rpchost resolved from the running Bitcoin variant
(hardcoded bitcoin-knots broke Core nodes); manifest uses derived_env
- bitcoin status: clean human message for connection-reset/startup; raw
URLs + os-error chains no longer reach the app card
- fedimint-clientd: chown /var/lib/archipelago/fmcd to 1000:1000 (root-
created dir crash-looped the rootless container, EACCES) — first-boot
script + pre-start self-heal
- log volume (>1GB/day on a day-old node): journald caps drop-in (ISO +
bootstrap self-heal), bitcoind -printtoconsole=0 everywhere (90% of the
journal was IBD UpdateTip spam), tracing default debug→info
Frontend:
- Login: Enter advances to confirm field then submits; submit always
clickable with inline errors (was silently disabled on mismatch);
Restart Onboarding needs a confirming second click (the mismatch →
"onboarding restarted" trap)
- sync store: 30s state reconciliation + refetch on re-entrant connect;
20s containers-scanned escape hatch so Checking can never show forever;
fresh empty node reaches the real "no apps yet" state
- intro video: CRF20 re-encode (SSIM 0.988) + faststart — moov was at EOF
so playback needed the full 15MB first (the intro lag)
- backgrounds: 10 heaviest JPEGs → WebP q90 (9.4MB→6.6MB); 7 stayed JPEG
(WebP larger on noisy sources)
- Web5ConnectedNodes: drop unused template ref that failed vue-tsc -b
ISO/kiosk:
- nginx: /assets/ 404s no longer cached immutable for a year; HTTPS block
gained the missing /assets/ location (served index.html as images)
- kiosk: launcher/service spliced from configs/ at ISO build (stale
heredoc force-disabled GPU); MemoryHigh/Max 1200/1500→2200/2800M (kiosk
rode the reclaim throttle = the lag); firmware-intel-graphics +
firmware-amd-graphics (trixie split DMC blobs out of misc-nonfree)
Verified: cargo test 898/898 green, npm run build green with dist
contents confirmed (webp refs, lnd.png, faststart video, new strings).
Handover for ISO build + deploy: docs/HANDOVER-2026-07-02-iso-feedback.md
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Peers that opt in via a new "Share Location" toggle in Settings
(server.set-location RPC) get plotted on other trusted peers' Mesh Map
with a distinct Archy-logo marker, separate from raw LoRa radio peers.
Location is persisted locally, carried in NodeStateSnapshot, and
propagated through federation sync/delta like other node state.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Add a TollGate row (Enabled/Disabled/Not installed) to the Home
dashboard's Network tile, polling the existing openwrt.get-status RPC
on the same cadence as the other network rows. Only rendered once an
OpenWrt router is actually configured, so nodes without one aren't
cluttered with an always-"Not configured" row.
Also fixes the underlying reason this could never have worked: nothing
in the OpenWrt Gateway flow ever persisted the router's host/credentials
server-side — the "connect" form only kept them in local component
state, so any no-args openwrt.get-status call (this new tile, and even
the Gateway page's own reload) always failed with "No router
configured" despite a fully working, provisioned router. Now
handle_openwrt_get_status saves the connection to router_config.json
whenever a host is explicitly passed in and the connection succeeds.
New MeshDevicePanel.vue, added as a 4th/5th tab entry to activeTab/toolsTab/
mobileTab following the exact existing pattern (chat/bitcoin/deadman/
assistant/map). Shows firmware version, node ID, advert name, LoRa region,
channel, and device type -- firmware_version/self_node_id were already
server-side but never rendered; region is new (composed into MeshStatus from
MeshConfig.lora_region at read time, not part of the live session state).
Reboot button wired to the already-working mesh.reboot-radio RPC.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Backend: parse_mesh_packet now decodes MeshPacket.rx_snr (field 8, float) and
rx_rssi (field 12, int32), and a new POSITION_APP branch decodes Position.
latitude_i/longitude_i (fields 1/2, sfixed32) -- all field numbers confirmed
against the canonical meshtastic/protobufs mesh.proto, not guessed. Threaded
through ParsedContact -> refresh_contacts -> MeshPeer (mirroring how
pkc_capable was wired for #17), so mesh.peers now surfaces real rssi/snr/lat/
lon instead of always-null. Fixed a real bug found along the way:
update_node_info's unconditional contact replace would have silently wiped
any already-tracked signal/position data on the next NodeInfo packet -- now
preserves it.
Frontend: mesh.ts's updateNodePositionsFromPeers() feeds real position data
into the SAME nodePositions map MeshMap.vue already renders from (parallel to
the existing Coordinate/Alert-message path) -- MeshMap.vue itself needed zero
changes, it was already built for this.
105/105 mesh tests pass (4 new: rx_snr/rx_rssi decode, position decode +
incomplete-field handling, full packet_to_inbound_frame integration).
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Phase 0 gates #2/#3 (two-node LXMF-over-LoRa, external Sideband interop) passed
on real hardware (.116's flashed Heltec V3 RNode <-> a phone-flashed RNode running
Sideband) — RNS announce, encrypted DM round-trip, and contact binding all verified
live. Fixed two bugs found in the process: the Reticulum send path wasn't stamping
outbound messages as E2E despite LXMF being unconditionally encrypted, and the
per-message transport pill collapsed Meshcore/Meshtastic into one generic "lora"
color instead of distinguishing the three radio transports.
Built on top of that link: a Columba-style image/file send experience —
compression-quality presets with a real transfer-time estimate (mesh.transport-advice,
now device-throughput-aware), receive-side thumbnail previews + auto-render for
already-local attachments, and async voice messages, all reusing the existing
ContentRef/ContentInline attachment pipeline. The headline addition is genuine RNS
Resource transfer support (daemon-side RNS.Link + RNS.Resource, Rust-side
send_resource/resource_recv plumbing, a new "resource-mesh" transport-advice tier)
so compressed photos up to 2MB now actually transfer over LoRa for Reticulum peers
instead of always falling back to Tor past the small inline-chunk cap.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Adds a per-message transport badge to archy↔archy mesh chats and fixes the
long-broken E2E badge — both meshcore and meshtastic, styled like the existing
E2E pill.
Transport pill:
- New `MeshMessage.transport` ("lora"/"fips"/"tor"), surfaced in the UI beside
the E2E badge (Mesh.vue transportLabel() → Mesh/FIPS/Tor, mesh-styles.css).
- Sent LoRa → "lora"; sent federation → finalized to the real leg ("fips"/"tor")
once the background send resolves (req.send_json transport), via an id-keyed
store update.
- Received: a post-dispatch stamp on handle_typed_envelope_direct's output
(monotonic ids) tags both transports without threading through all 20 typed-
dispatch sites — radio wrapper stamps "lora", federation injector stamps the
peer's last_transport ("fips"/"tor", default tor; the inbound HTTP carries no
FIPS-vs-Tor signal).
- Plain native/channel LoRa frames → "lora"; channel broadcasts stay non-E2E.
E2E pill fix:
- `encrypted` was hardcoded false at every MeshMessage construction site, so the
UI badge (Mesh.vue `v-if="msg.encrypted"`) never showed. Now: federation
envelopes are E2E (identity-signed over an encrypted transport); the meshcore
native-DM receive path already had a real `encrypted` flag (now also tagged
with transport). meshtastic-PKI radio E2E flag threading is a noted follow-up.
Backend cargo check + frontend vue-tsc build both green. Needs a live radio +
multi-transport pass on .116/.228 to confirm end-to-end (see
project_transport_pill / project_meshtastic_parity).
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
- Mobile launches use the store-driven panel (no route push) so the background
tab no longer changes and closing returns to where you launched from.
- Tab-only apps open directly (in-app WebView on companion / new tab on PWA) —
no "this app opens in a tab" interstitial.
- Shared AppLoadingScreen (app icon + progress bar) on the app session and the
legacy iframe overlay instead of a black screen.
- Pin the dashboard to 100dvh on mobile so the mesh chat/tools panes stop sliding
under the bottom tab bar in mobile browsers (no-op in the companion WebView).
- ElectrumX/electrs/electrs-ui ids now resolve to the real ElectrumX icon in My Apps.
- isMobile made reactive so overlay/footer/teleport decisions track the viewport.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
App launching (DEMO):
- resolveAppUrl routes every app to its demo target: mock UIs for Bitcoin Core,
ElectrumX, Fedimint (served by the backend), IndeeHub → iframe indee.tx1138.com,
Mempool → mempool.space/testnet (new tab); all others → a generic "Demo preview"
notice page.
- Non-demoable apps show a disabled "No demo" install button (marketplace details,
app grid, featured apps).
Onboarding:
- Demo treats the visitor as fully set up so the onboarding WIZARD (seed/identity)
is never forced; the welcome intro still replays per day. Intro CTA goes straight
to login; wizard entry points + login restart-onboarding link hidden in demo.
Network:
- federation.list-nodes now returns 12 trusted/federated nodes (9 trusted, 3
observer); transport.peers already at 5.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
A node reachable both over LoRa and federation has two MeshPeer rows (radio
twin: low contact_id + firmware key; federation twin: high contact_id +
archipelago key), and messages key by peer_contact_id split across the two ids
— so opening one twin shows an empty thread (the .120->.89 symptom).
- backend: new group_peer_twins() helper groups peers by arch_pubkey_hex (set on
BOTH twins by bind_federation_twins), keeps the radio id as the mesh-first
send target, and unions messages across all twin ids. Wired into
conversations.list / conversations.messages / mesh.contacts-list. +3 unit tests.
- frontend: the live chat list merges client-side (mergedPeers) and matched twins
by the "Archy-z6Mk..." advert prefix, which the Meshtastic device rename broke
(radio now advertises the server name). Merge by arch_pubkey_hex instead, which
the backend reliably sets on both twins. Expose arch_pubkey_hex on MeshPeer.
- fix unrelated stale test: EcashTransaction test missing the new `kind` field.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
UI (this session):
- Global audio player now scales the whole interface into the space above it
on desktop (sidebar + main) and docks directly above the tab bar on mobile;
it stays visible while navigating.
- Mesh mobile redesign: floating Chat / BTC / Dead Man / AI / Map tab strip
with a single fixed, internally-scrolling pane (page no longer scrolls);
tabs hide while a conversation is open; floating back button; collapsible
Device panel (starts collapsed); keyboard-aware conversation sizing via
VisualViewport so the chat sits just above the keyboard.
- Cloud file grid: uniform 4/3 card heights (folders + images match).
- Swipe left/right switches tabs on the Apps and Web5 screens.
- Map tool fills its pane (no bottom gap); fix skewed Share Location toggle
on mobile (global min-height rule was deforming the switch).
- Trim redundant helper copy from the mesh AI tab.
Also bundles pre-existing in-progress work that was already in the tree:
mesh listener/session + wallet + container + bitcoin-status backend changes,
docker UI updates, and assorted other UI tweaks.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
- DMs now use native meshcore unicast (CMD_SEND_TXT_MSG) instead of @DM2 channel
broadcasts: private (E2E-encrypted to the recipient pubkey by firmware), off the
public channel, and decodable by stock clients. Plain text (split, not MC-chunked)
to non-archipelago contacts; typed envelopes to archy peers.
- !ai replies now DM the asker privately (RadioDm) instead of broadcasting on ch0.
- Auto contact-import: a heard advert (PUSH_CONTACT_ADVERT/0x80, 32-byte pubkey) is
added via CMD_ADD_UPDATE_CONTACT (0x09) so contacts appear without a flood advert.
- clear-all now DELETES firmware contacts via CMD_REMOVE_CONTACT (0x0F) instead of
blocklisting; blocking filter removed entirely. Wiped contacts return when reachable.
- Contact reachability: MeshPeer carries last_advert + reachable (path-based); UI shows
a reachability dot.
- Peers list: contact search box (filter by name/DID/npub/pubkey) with a clear button.
- send_message routes stock contacts as plain native text (fixes garbled envelopes).
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
- mesh: stop broadcasting ARCHY:2 identity on the public channel (startup + every advert tick); receive path still parses inbound. No more public-channel spam.
- mesh assistant: trigger on !ai/!ask typed in 1:1 chat (was only the dead AssistQuery path + bare channel text); route the reply transport-aware via MeshService::send_message (Tor for federation peers, LoRa for radio) through a new AssistChatReply event consumed at the server layer — fixes replies never reaching federation askers.
- mesh assistant: per-contact !ai allowlist (allowed_contacts) bypassing trusted_only; config + RPC + is_sender_allowed.
- fedimint-clientd manifest: network_policy open -> bridge (invalid value made the loader skip the whole manifest, so fmcd never ran and federations never joined/listed).
- ui: AI panel — Claude model dropdown (Haiku/Sonnet/Opus presets) + allowlist contact picker.
- ui: Settings — App Updates + App Registry moved under Account.
- ui: mesh chat — overscroll-behavior: contain so chat scroll no longer bleeds to the contacts panel.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
ssmithx