4 Commits

Include renames

Author	SHA1	Message	Date
archipelagoandClaude Fable 5	e68fe071a7	docs: v1.7.112-alpha changelog + What's New sync + flasher integration point ... Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>	2026-07-22 20:40:05 -04:00
archipelagoandClaude Fable 5	8b744d377c	feat(mesh): radio hot-swap — probe on plug-in, keep-as-is vs apply-our-settings ... Plugging in any LoRa radio now surfaces the device setup modal EVERY time (dismissals clear on unplug; works while mesh is enabled; 2-poll debounce so ordinary reconnect blips don't flash it), showing what's currently on the stick before anything is written: - mesh.probe-device RPC: identifies the firmware read-only in the same Reticulum->Meshcore->Meshtastic order as auto-detect. Meshtastic yields region/modem-preset/channels (want_config is a read); MeshCore yields name/node-id + firmware version via the previously-unused CMD_DEVICE_QUERY; RNode via the bare KISS DETECT (no daemon spawn). Path must be a detected candidate port; the live session's port refuses. - "Keep As Is": manage_radio=false persists in MeshConfig and the session skips every on-connect config write (region, channel, PHY params, advert name) — the radio runs exactly as flashed, hot-swappable. - "Set Up with Archipelago Settings": second screen shows the params that will be applied (channel, region, the node's persisted RF params - e.g. the validated Portugal preset - with the per-region community plan as fallback) before writing anything. - Stale-type fix: disconnect now resets device_type/firmware_version, so a swapped stick no longer shows the previous radio's firmware; probed kind pins device_kind so the right probe runs first on connect. Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>	2026-07-22 16:25:19 -04:00
DorianandClaude Fable 5	977b8d06b8	fix(ui): Connect to Mesh routes to /dashboard/mesh, not the 404 /mesh ... Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>	2026-07-17 03:07:30 +01:00
archipelagoandClaude Fable 5	7b36b5cc34	feat(mesh): device-detected setup modal with board images + full radio settings ... Plugging in a LoRa radio now pops a global two-step setup modal on any page: step 1 shows the ACTUAL detected board (25 board SVGs vendored from the Meshtastic web-flasher, GPL-3.0; matched by USB product string on native-USB boards, vid:pid heuristics for bridge chips, animated fallback otherwise); step 2 configures with Archipelago presets — the LoRa region pre-selected from the node's location (new lat/lon→region mapping), channel 'archipelago', node name, and an advanced firmware pin. Options adapt per protocol: region+channel program Meshtastic; MeshCore shows its community frequency plan (firmware owns RF); RNode defers to the Reticulum daemon config. Backend: mesh.configure now accepts lora_region (validated against the driver's region table) and device_kind (probe pin); mesh.status returns the persisted values plus per-port USB identity (sysfs vid/pid/product) for board identification. The Mesh Device tab gains a full settings form (region with duty-cycle/legality hints, firmware pin, channel, name, identity broadcast) replacing the read-only panel; the old Mesh-page-only onboarding modal is superseded by the global flow. Mock backend: stateful mesh config so the dev UI demos the full detect→configure round-trip (disable mesh → modal fires with Heltec V3). Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>	2026-07-14 08:40:18 -04:00