8b744d377c
Some checks failed
Demo images / Build & push demo images (push) Failing after 1m49s
Plugging in any LoRa radio now surfaces the device setup modal EVERY time (dismissals clear on unplug; works while mesh is enabled; 2-poll debounce so ordinary reconnect blips don't flash it), showing what's currently on the stick before anything is written: - mesh.probe-device RPC: identifies the firmware read-only in the same Reticulum->Meshcore->Meshtastic order as auto-detect. Meshtastic yields region/modem-preset/channels (want_config is a read); MeshCore yields name/node-id + firmware version via the previously-unused CMD_DEVICE_QUERY; RNode via the bare KISS DETECT (no daemon spawn). Path must be a detected candidate port; the live session's port refuses. - "Keep As Is": manage_radio=false persists in MeshConfig and the session skips every on-connect config write (region, channel, PHY params, advert name) — the radio runs exactly as flashed, hot-swappable. - "Set Up with Archipelago Settings": second screen shows the params that will be applied (channel, region, the node's persisted RF params - e.g. the validated Portugal preset - with the per-region community plan as fallback) before writing anything. - Stale-type fix: disconnect now resets device_type/firmware_version, so a swapped stick no longer shows the previous radio's firmware; probed kind pins device_kind so the right probe runs first on connect. Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>