Replace the GRUB/efi-raw + prepare-rpi-image.sh post-processing approach with a declarative SD image: - rpi4-image.scm: MBR image with FAT "RPI-BOOT" (start4.elf, u-boot.bin, config.txt, overlays, DTB) and ext4 "Guix" root. - rpi4.scm: u-boot-bootloader variant with no raw-disk installer, so reconfigure only rewrites extlinux.conf; serial console on ttyS1; linux-rpi4 kernel; root account with uid 0. - packages/rpi4-linux.scm: nonguix linux + CLK_BCM2835, SD (sdhci-iproc), GENET built in. - packages/u-boot-rpi-arm64-guix-router.scm + rpi-env-layout.patch: move load addresses so a 36 MB distro kernel doesn't overlap FDT/initrd. - run-qemu-rpi4.sh: direct-kernel QEMU raspi4b smoke test. - Docs: PITFALLS #16-21, README boot flow; Phase 1 confirmed on hardware. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
66 lines
3.0 KiB
Bash
Executable File
66 lines
3.0 KiB
Bash
Executable File
#!/usr/bin/env bash
|
|
# Smoke-test the Pi 4 SD image in QEMU's raspi4b machine (no root needed).
|
|
#
|
|
# Boots the kernel, initrd and command line from the image's own
|
|
# /boot/extlinux/extlinux.conf (first entry) with the SD image attached, and
|
|
# gives you the serial console in this terminal. Login root / guix.
|
|
# Quit with Ctrl-a x.
|
|
#
|
|
# QEMU's raspi4b is incomplete, so this differs from real hardware:
|
|
# - U-Boot is skipped: QEMU can't run this kernel on the stock Pi 4 DTB, and
|
|
# U-Boot would hand it exactly that. The DTB is patched instead:
|
|
# * AON block (L2 irqchip, DVP clock gate, HDMI, its I2C) disabled: not
|
|
# emulated, reading it aborts the kernel;
|
|
# * mini-UART (ttyS1) disabled: QEMU's model storms IRQs; the PL011
|
|
# (ttyAMA0) is the console here instead;
|
|
# * QEMU wires the SD card to the WiFi SDHCI (7e300000), so its WiFi
|
|
# power sequence (firmware GPIOs, not emulated) is dropped.
|
|
# - No GENET/PCIe/USB 3: no networking.
|
|
#
|
|
# Usage: ./run-qemu-rpi4.sh [guix-rpi4-claude.img]
|
|
set -euo pipefail
|
|
cd "$(dirname "$0")"
|
|
IMG=${1:-guix-rpi4-claude.img}
|
|
[ -e "$IMG" ] || { echo "no image $IMG; run ./build-rpi-image.sh first" >&2; exit 1; }
|
|
WORK=$(mktemp -d)
|
|
trap 'rm -rf "$WORK"' EXIT
|
|
|
|
fdtput() {
|
|
if type -P fdtput >/dev/null; then command fdtput "$@"
|
|
else guix shell dtc -- fdtput "$@"; fi
|
|
}
|
|
|
|
# Root partition (2nd) offset, then read the boot entry with debugfs.
|
|
start=$(/sbin/sfdisk -J "$IMG" | python3 -I -c \
|
|
'import json,sys; print(json.load(sys.stdin)["partitiontable"]["partitions"][1]["start"])')
|
|
ROOTFS="$IMG?offset=$((start * 512))"
|
|
conf=$(/sbin/debugfs -R "cat /boot/extlinux/extlinux.conf" "$ROOTFS" 2>/dev/null)
|
|
field() { awk -v k="$1" '$1 == k { $1 = ""; sub(/^ /, ""); print; exit }' <<<"$conf"; }
|
|
kernel=$(field KERNEL); initrd=$(field INITRD); fdtdir=$(field FDTDIR); append=$(field APPEND)
|
|
echo "kernel: $kernel"; echo "initrd: $initrd"
|
|
|
|
/sbin/debugfs -R "dump $kernel $WORK/Image" "$ROOTFS" 2>/dev/null
|
|
/sbin/debugfs -R "dump $initrd $WORK/initrd" "$ROOTFS" 2>/dev/null
|
|
/sbin/debugfs -R "dump $fdtdir/broadcom/bcm2711-rpi-4-b.dtb $WORK/rpi4.dtb" "$ROOTFS" 2>/dev/null
|
|
|
|
for node in clock@7ef00000 interrupt-controller@7ef00100 hdmi@7ef00700 \
|
|
i2c@7ef04500 hdmi@7ef05700 i2c@7ef09500 serial@7e215040; do
|
|
fdtput -t s "$WORK/rpi4.dtb" "/soc/$node" status disabled
|
|
done
|
|
fdtput -d "$WORK/rpi4.dtb" /soc/mmc@7e300000 mmc-pwrseq
|
|
fdtput -r "$WORK/rpi4.dtb" /soc/mmc@7e300000/wifi@1
|
|
|
|
# Writable copy, padded to a power of two (QEMU's SD card model insists).
|
|
cp --sparse=always "$IMG" "$WORK/sd.img"
|
|
chmod u+w "$WORK/sd.img"
|
|
size=$(stat -c %s "$WORK/sd.img")
|
|
pow=1; while [ $pow -lt "$size" ]; do pow=$((pow * 2)); done
|
|
truncate -s $pow "$WORK/sd.img"
|
|
|
|
append=$(sed -E 's/console=ttyS[0-9]+[^ ]*/console=ttyAMA0,115200/; s/console=tty1 ?//' <<<"$append")
|
|
qemu-system-aarch64 -M raspi4b -m 2G \
|
|
-kernel "$WORK/Image" -initrd "$WORK/initrd" -dtb "$WORK/rpi4.dtb" \
|
|
-append "clk_ignore_unused $append" \
|
|
-drive if=sd,format=raw,file="$WORK/sd.img" \
|
|
-display none -monitor none -serial mon:stdio -serial null
|