A pairing QR minted while the node UI was browsed over the mesh carried
npub….fips as fhost. Android's system DNS can't resolve .fips, so every
direct handshake dial failed and first connect crawled through public-
anchor discovery (2m35s observed) instead of one LAN hop.
- node UI: resolveServerUrl treats .fips names and IPv6 ULA literals as
phone-unreachable and substitutes the node's LAN IP (same guard as
tailnet/localhost)
- app: QR parser falls back to the url param's host when fhost is .fips
- app: peer store never keeps .fips dial addresses
- app: peer aliases slugged for the fips host map (spaces dropped
"Framework PT"/"Mesh anchor" from name resolution entirely)
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
A settled payment now takes over the modal: animated check with radiating
rings (emerald + one Archipelago-orange), the amount large, method label,
then copyable payment hash (lightning) / transaction ID (on-chain) and a
settling note, with Send-another / Done. Replaces the old alert-line at the
bottom of the form. Reduced-motion honored.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
- SendBitcoinModal crashed AT MOUNT on device ('Cannot access R before
initialization'): the invoice-first block's watch() evaluates its
computed source at setup, which read effectiveMethod while still in
its temporal dead zone (declared 20 lines later). Send button did
nothing and the failure poisoned sibling modal data. Block moved below
effectiveMethod, with a comment so it can't drift back.
- Cold start injected 0px safe-area vars (onPageFinished can beat window
attachment; rootWindowInsets null) — UI lost top/bottom margins and
the tab bar sat in the gesture zone eating taps. Injection extracted
to injectSafeAreaVars(), re-fired from an OnApplyWindowInsetsListener
when real insets arrive, on page finish, and on reattach.
- MeshLoadingScreen wears the proper brand: pixel 'a' in the black
circle-container + F*CK IPS MESH wordmark.
Served APK: 0.5.10 (vc30). Reproduced+diagnosed live on-device.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Three npub-bearing anchors pushed the pairing URI to ~600 chars (QR ~v23 at
EC-M) — phone cameras couldn't lock onto it off a screen. The phone only
needs the node itself (LAN p2p) plus one public rendezvous (vps2 preferred),
and screen scans don't need EC-M's damage tolerance — L drops a full
version tier.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
A pasted fixed-amount invoice auto-fills and locks the amount ('set by
invoice' — nothing to type, just review and send); zero-amount invoices get
an explicit 'enter how many sats' hint. Plus a clipboard Paste button on the
destination field (hidden where clipboard read can't work).
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
- Paid sharing: AccessControl::Paid gains an accepted-methods list
(lightning/onchain/ecash/fedimint; empty = all, back-compat). Sellers pick
methods in ShareModal, gated on what the node can actually receive (LND
running/channel open, ecash wallet, fedimint joined) with an ⓘ that
explains exactly how to enable a missing rail. Enforced server-side (the
invoice/onchain mints refuse non-accepted methods; the serve gate only
honors tokens/hashes for accepted rails) and the buyer's pay modal only
offers what the seller accepts.
- Purchased music: the two remaining lightbox paths now use the bottom-bar
player — the immediate post-ecash-purchase viewer and the Paid Files
tab's window.open.
- Picture-in-picture buttons on the peer video player and the cloud media
lightbox (utils/pip.ts; Chromium/Safari, no-op elsewhere).
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
The scan/upload chooser (already on main) keeps the first move; when the
Android companion's window.ArchipelagoQr bridge exists, 'Scan with
camera' opens the native CameraX modal instead of getUserMedia — which
the companion's plain-http origin doesn't even have, so the button now
shows there too. Decodes come back via window.__archyQrResult, status
lines mirror out via setStatus, and stopScanning closes the native
modal once a code is accepted.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Another agent's feat/companion-3finger-native-scan: native wallet QR scanner
in the companion (WalletQrScannerModal.kt), three-finger menu gesture,
WebView file uploads, and the same every-open scan/upload chooser as a
dedicated pane with native-scanner handoff. Conflict in WalletScanModal.vue
resolved in the branch's favor — its choose-pane implementation replaces the
in-pane interstitial from 6502f13e (same UX, plus the native handoff).
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
The scan modal now always lands on a chooser pane — Scan with camera /
Upload image / paste — instead of auto-starting the camera. When the
Android companion's ArchipelagoQr bridge is present, live scanning is
delegated to the native camera modal (WebView getUserMedia lags);
animated-QR progress and errors mirror onto it via setStatus.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
- Per-app default display mode: explicit user pick (remembered per app) ->
app default -> last global -> panel; IndeeHub defaults to fullscreen.
- data-controller-primary: a media file card's gamepad-select clicks the
card (audio -> bottom-bar player, video -> lightbox) instead of the
card's download link.
- Discovered-nodes list scales with the viewport (max(14rem,45vh)) instead
of cramming a long list into a fixed 224px box.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
- Pasting an invoice/address now gets the same second-step confirmation the
scan flow has: method, destination, live balance -> amount -> balance
after (invoice-fixed amounts win over the typed one), for every rail
including token minting. Nothing pays until Confirm & Send.
- The scan modal opens on a chooser every time: scan with camera or
upload/take a photo of the QR — the camera no longer auto-starts, and
Back only relights it if camera was the user's choice.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
The pairing QR was effectively IP-first: the phone dialed the scanned LAN
host and went dark when the LAN renumbered or it left home. FIPS peers on
npubs; IPs are only dial hints. fanchors now leads with the paired node
ITSELF (fnpub @ current host, npub-keyed so LAN contact is direct p2p over
FIPS and survives DHCP), and fips.pair-info always includes the Archipelago
vps2 public anchor (pairing hint only — the node's own anchor file is not
modified) so the phone can rendezvous through the public mesh when away.
Contract doc updated with the REQUIRED app-side changes (built on the Mac).
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
The double-share/double-pay chain (user hit it live, 2026-07-22):
ShareModal's already-shared lookup compared the slash-stripped stored
path against the leading-slash filepath — never matched — so every
re-share minted a NEW catalog entry with a new id, and the buyer's
owned-guard (keyed by id) saw the duplicate as unowned and paid again.
Three independent walls now: (1) ShareModal normalizes both sides so
re-shares reuse the entry; (2) content_server::add_item dedupes by
filename server-side (updates in place, keeps the id so buyers' owned
records stay valid); (3) the buyer REFUSES to pay for content it
already owns — matched by (onion, content_id) OR (onion, filename) —
and serves the cached copy instead, before any ecash is minted.
Purchases also auto-file into Photos/Music/Documents on the node (same
buckets as the Cloud view, collision-safe naming) so bought files show
up where files live on every device, and Cloud gains a Paid Files tab
listing every purchase (name, size, sats paid, date) with in-app view.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
- LND watchdog: framework-pt's LND sat wedged 14h (RPC up, server never
ready, channels inactive) with nothing noticing. 15 consecutive bad
minutes now bounce the container automatically (30min cooldown) —
silent multi-hour Lightning outages become self-healed blips.
- Send modal: Auto tab hidden; Ecash splits into Cashu and Fedi (new
wallet.fedimint-send RPC wrapping the existing spend_from_any); both
rails render the generated token as a scannable QR alongside the
copyable text.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
On the companion (plain-http LAN = no secure context = no live camera)
the photo path IS the scanner, and qr-scanner's single wasm pass often
misses the dense QR of a full BOLT11 invoice. Android WebView's native
BarcodeDetector handles them easily — try it first, wasm as fallback,
plus a 'Reading photo…' status.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
The Channels panel's 'Funding tx in Mempool' link still hardcoded the
local app (missed in the explorer rollout): now it routes like every
other tx link — local Mempool when running, else the saved external
explorer, with the first-time consent modal setting it up and then
opening the tx. The consent modal moves to z-3600 so it renders above
the Wallet Settings modal that can trigger it.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Outside-close listeners move from click to pointerdown: pointerdown
fires before the open-toggle re-render, so the kiosk's slow software
compositing can no longer detach the click target mid-flight and close
the menu the instant it opens. color-scheme:dark (CSS + meta) pins every
native control — select popups, scrollbars, pickers — dark regardless of
the user's OS theme; explicit select/option colors cover Firefox.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
BaseModal becomes a flex column: title row and the new #header slot
(tabs) stay fixed at the top, #footer (action buttons) fixed at the
bottom, only the default slot scrolls (default max-h 90vh unless the
caller sets one). Wallet Settings migrates: tabs pinned, four duplicated
in-pane Close rows collapse into one pinned footer that carries the
active tab's primary action.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
The QR mirrored the browser origin — an operator browsing over Tailscale
handed the phone a 100.x address it has no route to, so pairing silently
never connected (reported 2026-07-22; the 'random password' alongside it
was the device token working as designed). system.get-hostname now also
returns the default-route LAN IPv4; the QR substitutes it (or the mDNS
name) whenever the origin is localhost or a CGNAT/tailnet 100.64/10 IP.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
AppLauncherOverlay sat at z-2400 under BaseModal's z-3000, so an app
opened from e.g. the Transactions modal loaded invisibly underneath it.
z-4000 lets the existing enter animation play over the modal; closing
the app returns to the modal you came from.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Pruned nodes can't run the Mempool app, but tx links blindly opened it
anyway. Now: local app when running; otherwise an external explorer
(default tx1138.com) behind a one-time amber consent modal that spells
out what the other server's operator learns (tx of interest + IP) and
lets the user point at their own instance (placeholder mempool.guide).
Wallet Settings gains an On-chain tab (explorer URL + don't-warn toggle);
tabs renamed Cashu/Fedi so five fit in the row.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
LND's RPC answers before its p2p server finishes loading, so connect/open
during that window failed red with the raw "server is still in the
process of starting". Now: quiet ~30s retry first; if still starting, a
calm amber "still finishing its startup" notice instead of an error.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
- Android/rust/archy-fips-core: leaf-only fips node as a JNI cdylib (fips
pinned to the fips-native fork rev with VpnService fd support), built by
gradle via cargo-ndk (arm64), tested on host
- ArchyVpnService: split-tunnel VpnService routing only fd00::/8 (MTU 1280,
foreground specialUse); FipsManager handles the one-time VPN consent and
silent auto-start — no settings surface at all
- pairing QR now fully configures the mesh: fnpub/fip/fhost/fudp/ftcp plus
fanchors (the node's seed-anchor list, npub@addr/transport) so the phone
can rendezvous through public anchors when the LAN endpoint is unreachable
- default seed anchors gain the two dual-transport join.fips.network test
anchors (23.182.128.74:443/tcp, 217.77.8.91:443/tcp); anchor adverts are
Nostr kind-37195 events
- device token rides the password field end-to-end: backend accepts tokens
wherever it accepts the password, so scan = instant login (WebSocket auth
+ WebView form injection unchanged); token logins skip TOTP
- ServerEntry.meshIp + IPv6-bracketed URLs; WebView retries the mesh address
on main-frame errors, auto-login and origin checks honor it
- companion v0.5.0 (versionCode 20), arm64 abiFilter; FipsNative.available
gates everything so non-arm64 still runs as a plain companion
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
- auth.createDeviceToken / listDeviceTokens / revokeDeviceToken RPCs; only
SHA-256 hashes persist in data_dir/device-tokens.json
- auth.login accepts {token} (same rate limiter, skips TOTP like remember-me)
- pairing QR now carries name (server name, fallback "My Archipelago"),
tok (instant login), and FIPS mesh params from new fips.pair-info RPC
(npub, fips0 ULA, transport ports)
- companion onboarding drops the WireGuard install/tunnel screens — remote
access moves to the FIPS mesh embedded in the companion app
- fix: fips daemon UDP bind now 2121, matching the published container port
and fleet rosters (was upstream's 8668 — inbound UDP was dead on bridged
installs, mesh silently rode TCP 8443)
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Plugging in any LoRa radio now surfaces the device setup modal EVERY time
(dismissals clear on unplug; works while mesh is enabled; 2-poll debounce
so ordinary reconnect blips don't flash it), showing what's currently on
the stick before anything is written:
- mesh.probe-device RPC: identifies the firmware read-only in the same
Reticulum->Meshcore->Meshtastic order as auto-detect. Meshtastic yields
region/modem-preset/channels (want_config is a read); MeshCore yields
name/node-id + firmware version via the previously-unused
CMD_DEVICE_QUERY; RNode via the bare KISS DETECT (no daemon spawn).
Path must be a detected candidate port; the live session's port refuses.
- "Keep As Is": manage_radio=false persists in MeshConfig and the session
skips every on-connect config write (region, channel, PHY params, advert
name) — the radio runs exactly as flashed, hot-swappable.
- "Set Up with Archipelago Settings": second screen shows the params that
will be applied (channel, region, the node's persisted RF params - e.g.
the validated Portugal preset - with the per-region community plan as
fallback) before writing anything.
- Stale-type fix: disconnect now resets device_type/firmware_version, so
a swapped stick no longer shows the previous radio's firmware; probed
kind pins device_kind so the right probe runs first on connect.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
- Wallet scan modal: fallback buttons no longer flash on open (spinner while
the camera auto-starts, video hidden until live — also kills the Android
WebView play-glyph), decode rate 10/s -> 4/s (preview visibly lagged on
phones), clear messages for BOLT12 offers and LNURL/lightning addresses
(unsupported by the LND backend; full LNURL-pay is a queued feature),
zero-amount invoices in BIP21 URIs prefill from amount=.
- Pine 1.2.0: launch-page copy reflects the auto-seeded HA wiring (only
speaker pairing stays manual), adds the ask-Archy hint and the
silent-answers power-cycle troubleshooting tip (firmware FIFO bug).
- bitcoin-core/knots: rpcuser/rpcpassword move from bitcoind argv (world-
readable in host ps) to a 0600 config file inside the container tmpfs;
the salted txrelay rpcauth hash stays on argv. Catalog regenerated.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
The kiosk image ships no color-emoji font, so the wallet card's 🥜 and ⚓
drew as empty squares on TVs. Swap them for inline stroke SVGs matching
the neighbouring rows (wallet card + scan modal), and add
fonts-noto-color-emoji to the ISO package set so remaining emoji across
the UI (peer files, chat, content) render on future installs.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Two gaps kept the wallet QR scanner camera-less outside a desktop browser:
- Companion app: the WebView's default WebChromeClient silently denies
getUserMedia. Both WebViews (main + in-app overlay) now implement
onPermissionRequest — granting video capture only, requesting the
app-level CAMERA permission on first use (manifest already declares it).
- Plain-http origins (mobile web/PWA on a LAN node): browsers hide
navigator.mediaDevices entirely, no permission can bring it back. New
"Take photo of QR" fallback uses <input capture=environment> — the
native camera needs no secure context — and decodes the shot locally
with qr-scanner's scanImage. Live preview still used when available.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
All Zeus channel surfaces now read: "Open a channel with Zeus Olympus
node and start sending and receiving Lightning payments. Minimum
150,000 · maximum 1,500,000 on-chain sats required."
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
New WalletScanModal scans QR codes with the device camera (BarcodeDetector
with jsQR fallback) including animated/multi-frame QRs via qrloop, then
routes what it saw: BOLT11 invoices -> lightning pay (amount locked from
the invoice when present), bitcoin:/BIP21 URIs -> on-chain send, Cashu
tokens -> redeem, Fedimint invites -> join. Entry points: camera button on
the wallet card (far right), and a Scan button centered between the
Close/Send and Close/Receive buttons of both modals.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
vue-tsc in the release build (unlike the gate's type-check) rejects
indexing WG_RETRY_DELAYS_MS with a bare counter; hoist the delay into a
local and gate on undefined instead of the length check.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
On a fresh node the wgqr step is often reached while the backend is still
settling (services starting, backend restarting during orchestration): a
single 'Failed to fetch' left a permanently blank QR. Retry network-class
failures on a 2s/4s/8s ladder while the step is still on screen, then fall
back to the friendly error + Try again button.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
- Never show the get-the-app pitch inside the companion WebView itself
- Don't guess peer-exists when list-peers is unreachable: try create,
fall back to peer-config on already-exists errors
- Translate raw 'Failed to fetch' into an actionable network hint and
add a Try again button instead of a dead-end error
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
The SW-update modal is noise on the demo (nothing to update to) and both
accept-paths end in a reload that replays the intro from scratch. With
skipWaiting/clientsClaim off, ignoring the waiting worker is safe — the
new build activates on the visitor's next session.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Every Lightning setup (Open a Shop, Accept Payments, Run a Lightning Node)
gains a guided path to a working channel:
- New "Fund Your Bitcoin Wallet" step, gated on the blockchain finishing
its initial sync: while syncing it shows a live progress bar with a
counting-down time-remaining estimate; once synced it shows the on-chain
balance and a "Fund Wallet" button that opens the receive modal with a
fresh address, QR, and the Zeus channel limits (min 150,000 / max
1,500,000 sats) noted.
- When the sync finishes while a Lightning setup is mid-flight, a toast
pops with a "Finish setup" link straight back to the wizard (toasts now
support action links). If several setups are in flight, one is chosen —
the shared steps complete the lightning part of any of them.
- Channel steps are Zeus-branded (logo + copy) and land on the Lightning
Channels screen, which now carries an "Open a channel with Zeus" card
that prefills the open-channel modal with the Olympus peer URI, 150k
sats, and private-channel checked. "Get Zeus" links to zeusln.com.
- Setup completion now actually requires walking the manual steps (fund,
open channel, configure) — previously any step whose app was installed
was silently auto-ticked and running apps marked the whole goal done.
- Completion CTAs now go to the app you just set up ("Go to my shop
(BTCPay)" etc.) instead of the generic services list; iframe apps open
in the on-top app overlay.
- On-chain send modal gains a "Send all funds" sweep toggle, backed by
LND's send_all on the backend (amount no longer required when sweeping).
- Demo/mock: bitcoin.getinfo now returns the block_height/sync_progress
contract the UI reads and simulates a ~90s IBD ramp per visitor so the
timer, toast, and fund flow can all be demoed live; channel list data
fixed (status/channel_point/liquidity totals — the panel previously
crashed on the missing status field); sendcoins supports send_all.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
After 'I've installed it' the modal now walks WireGuard setup before
pairing: install WireGuard (hosted APK + QR), scan the node's tunnel
config (auto-provisioned 'companion-phone' peer via the existing
vpn.create-peer/peer-config RPCs, rendered client-side), switch it on,
then pair. Real nodes pair against http://10.44.0.1 — the tunnel only
routes AllowedIPs 10.44.0.0/16, so the LAN origin is unreachable
remotely. The demo fakes the tunnel via mock RPCs and keeps its public
pairing URL. REMOTE_ACCESS_STEPS=false restores the old two-screen flow.
Phones get the config as a downloadable .conf (can't scan own screen).
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Camera decode failed because every lever was at its minimum: the web
modal generated the QR at 112px (~2.5px per module before upscaling),
the analysis stream was CameraX's 640x480 default, and ZXing ran
without TRY_HARDER. Generate the QR at 512px (displayed 192px with a
real quiet zone), analyze at 1280x720, decode with TRY_HARDER plus an
inverted-luminance fallback. v0.4.14 (versionCode 18).
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
The App Store gains a "Your Node. In Your Pocket." hero banner for the
mobile companion app, in the same format as the featured-app banner, with
the app running on a phone mockup rising out of the right edge. Install
(or clicking anywhere on it) opens the Remote Companion download/pairing
modal — now openable on demand via a shared trigger instead of only
auto-showing once.
Also fixes the companion APK download on PWA installs: /packages/ now
bypasses the service worker's SPA fallback, which was answering the
download click with index.html instead of the file.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Companion side of docs/companion-pairing-qr.md (v1 contract):
- Connect screen lands on Scan Node's QR / Enter Manually; NESMenu gains
an add-server-by-QR icon button
- QrScannerOverlay: CameraX + ZXing core (pinned, on-device, no ML Kit)
- ServerQrParser: archipelago://pair?v=1&url=..[&pw=..]; unknown major v
-> 'update the app'; upsert by origin so re-scans never duplicate
- archipelago:// deep link registered (singleTask + onNewIntent) for the
modal's 'Open in companion app' button
- WebView auto-fills and submits Login.vue's password form when a stored
password exists — demo QR is one step to a logged-in session
- Web modal + handoff doc copy synced to the real label: Scan Node's QR
- v0.4.13 (versionCode 17)
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
The Remote Companion intro modal gains a second screen: an "I've installed
it" button next to the download button slides over to a pairing QR the
companion app scans to load the server details automatically, with a Back
button to return. The QR is an archipelago://pair deep link carrying the
server URL — the demo embeds https://demo.archipelago-foundation.org plus
the shared demo password so a scan lands in a logged-in demo session; real
nodes send only the address (kiosk advertises the mDNS .local name since
its own origin is localhost). Phones also get a tap-to-open deep-link
button since you can't scan your own screen.
App-side contract + requirements handed off in docs/companion-pairing-qr.md.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Two "unpolished" moments, worst on the demo:
- CompanionIntroOverlay gated on a point-in-time check of the reveal
cinematic flag. On a cold cache the entrance video can start buffering
after the 5s base delay, so the flag was still false when sampled and
the popup cut into the cinematic anyway. It now shows only after the
scene has been continuously calm for the full grace window.
- ConnectionBanner's flat 2.5s debounce fired on every tab-return and on
first dashboard paint: a dead WebSocket is the NORMAL state right then
(browsers kill background-tab sockets; first paint races the initial
connect), and reconnects routinely exceed 2.5s over real links. Those
moments now get a 10s runway (15s window after load/resume); genuine
mid-session drops keep the 2.5s response. On the demo the blip banner
is suppressed entirely — it runs against a local mock, so "Connection
lost" there is pure noise.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
A genuine service-worker update still reloaded the page the instant the
new worker claimed it. The kiosk and the public demo replay the intro on
every boot/visit, so an update landing mid-sequence restarted the whole
cinematic — the "typing intro resets to the start after several seconds"
report. Hold the reload until the splash is complete and the
dashboard-reveal cinematic is over, then apply it.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Clicking 'Back up now' on the Lightning seed banner only navigated to
the LND app page — and the backup card there hid itself permanently if
its single status fetch failed (common right after a fresh install),
so the click appeared to do nothing.
The banner now deep-links with ?seed-backup=1, which the LND page uses
to open the reveal flow directly, and the card retries its status fetch
with backoff instead of giving up after one failed RPC.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Two causes of the fresh-install 'loads, refreshes, loads again' jank:
- The PWA autoUpdate service worker claims the page right after the very
first load, firing controllerchange, which unconditionally reloaded the
page. Now only a *replaced* controller (a real update) triggers reload.
- A single 2s RPC echo decided server-down on first boot, flashing the
BootScreen and then hard-reloading seconds later. A second, 6s attempt
now runs before concluding the backend is down.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
