Traced why a device that's alive and USB-enumerating correctly could still
never complete a single protocol handshake, indefinitely: journal logs
showed genuinely concurrent connection attempts on the same port
(duplicate "Opened serial port"/"Starting X handshake" lines within
microseconds of each other, from what should be sequential probe steps) —
two independent listener sessions were racing on the same tty, each
corrupting the other's reads/writes.
Root cause was in MeshService::stop() combined with mesh::flash's earlier
STOP_LISTENER_TIMEOUT fix: stop() calls `self.listener_handle.take()`
(clearing the field to None immediately) and then awaits the handle with
no bound of its own. When a caller wraps the whole stop() call in a
timeout (as the flash job does, to avoid hanging the RPC response), a slow
listener — mid multi-candidate probe when the shutdown signal arrives —
would cause that outer timeout to cancel the await. But by then
`listener_handle` was already None, so MeshService believed the listener
was stopped, while the actual task kept running, orphaned (dropping a
JoinHandle does not abort the task). A later start() then spawned a
genuinely new listener, racing the orphaned one forever on the same port.
Fixed at the source: stop() now awaits its own handle through a mutable
reference (not by value) with its own bounded timeout, so on timeout it
still owns the handle and can call .abort() on it directly — guaranteeing
the task is actually gone before stop() returns, regardless of how any
caller wraps it.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Traced a real "Operation failed" on the post-flash configure step: the
flash job's own post-completion code unconditionally called
MeshService::start() after configure(), regardless of the persisted
enabled flag. In this incident, the user had toggled mesh off shortly
before the flash (config.enabled saved as false), but the job's forced
start() ran anyway — leaving the listener actually running while
self.config.enabled stayed false. When the user then clicked "Keep As Is"
on the fresh post-flash probe, their mesh.configure call correctly saw a
false→true transition and tried to start the listener itself, hitting
"Mesh listener already running" — the listener had already been
force-started behind the config's back.
Two fixes:
1. The flash job now only restarts the listener if the freshly-loaded
config still says enabled — respecting a user's own concurrent choice
to disable mesh instead of silently overriding it.
2. MeshService::start() is now idempotent: finding the listener already
running is treated as success, not an error. Ensuring the listener is
running is what every caller actually wants; whichever caller's start()
wins a race, the other finding it already satisfied is the correct
outcome, not a failure to surface to the user.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
--erase-all hit the exact same "ROM does not support function erase_flash"
error as a standalone erase_flash — confirmed live: esptool's --erase-all
is implemented as the same full-chip-erase command, not a per-sector loop,
so it needs the stub just as much. The real fix isn't finding another way
around the ROM bootloader's limitations — it's restoring the stub Debian's
package is missing.
Fetched the exact missing file (stub_flasher_32s3.json) from the matching
upstream esptool release tag and installed it directly on archy-x250-dev;
verified live with a read-only `flash_id` that stub mode now loads
("Uploading stub... Running stub..."). Removed --no-stub from flash.rs now
that normal stub-loader mode works correctly (faster and fully-featured vs.
the ROM-only fallback). scripts/self-update.sh now fetches and installs
this same file automatically whenever it's missing, so this isn't a
one-off manual fix tied to a single node.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Real esptool output on a live Heltec V4 exposed the next layer of the
--no-stub fix: "A fatal error occurred: ESP32-S3 ROM does not support
function erase_flash." The ESP32-S3 ROM bootloader only implements
per-sector erase (used internally as write_flash streams data), not a bulk
full-chip-erase opcode — that's a stub-firmware-only feature, and Debian's
esptool package ships without the stub (hence --no-stub in the first
place).
write_flash's own --erase-all flag gets the same "erase everything before
writing" outcome our "always erase before write" default requires, but via
the per-sector mechanism the ROM bootloader actually supports — one esptool
invocation instead of a separate erase_flash + write_flash pair.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Traced a real "Operation failed" report to its root: MeshService::stop()
ran synchronously inside start_flash_job, BEFORE the background task was
even spawned — so the RPC call itself blocked on it. The mesh listener's
reconnect/multi-candidate-probe loop doesn't check its shutdown signal
between candidates, and in this incident it was mid a Meshcore-then-
Meshtastic probe cycle when the flash request came in, so stop() never
returned. The HTTP request timed out client-side ("connection closed
before message completed" in the server log), the frontend surfaced a
generic "Operation failed", and — worse — the job had already been
inserted into the single-job-guard slot before stop() ran, so with nothing
ever spawned to complete it, every subsequent flash attempt failed with
"already in progress" until a full service restart.
The existing MAX_JOB_DURATION ceiling didn't help here: it only wraps
run_flash(), which is reached AFTER stop() returns — so a hang in stop()
itself was completely unguarded.
Fixed by moving the stop() call inside the spawned background task with
its own 20s timeout. The RPC call now always returns immediately once the
job is registered, and a slow-to-stop listener fails the job cleanly with
a clear message instead of hanging the request and wedging every future
attempt behind it.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
- payments.rs: an expired invoice can never succeed on retry, so the
error now says so and tells the payer the way out (ask the recipient
for a fresh invoice) instead of echoing LND's raw reason.
- middleware.rs: the error sanitizer masked every Lightning payment
failure as 'Operation failed. Check server logs' — but LND's reasons
('invoice expired', 'unable to find a path') are written for the
payer and are all actionable. 'Payment failed', 'Invalid payment
request' and 'Missing payment_request' now pass through, with a
regression test.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Browsers only honor a transparent same-origin iframe canvas when the
embedder and the iframe agree on color-scheme; the neode-ui shell's
:root{color-scheme:dark} was forcing the AIUI frame opaque and hiding
the background art behind the chat.
Also adds neode-ui/vite.preview.config.mts (preview on :8100 against
the mock backend on :5959).
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
The improved error logging from the last fix immediately paid off — real
esptool output on the next attempt showed two distinct bugs:
1. Debian's esptool package (4.7.0+dfsg-0.1) ships without the precompiled
"stub flasher" blobs (stripped for DFSG compliance), so the default
stub-loader flash mode fails immediately: FileNotFoundError: ... No such
file or directory: '.../stub_flasher_32s3.json'. Fixed with --no-stub,
which talks directly to the ROM bootloader instead — the standard
workaround for this exact Debian packaging gap.
2. The fallback-baud retry appended `--baud 115200` AFTER the subcommand
token (erase_flash/write_flash), but esptool requires global flags
before the subcommand — every retry failed with "esptool: error:
unrecognized arguments: --baud 115200", so the retry logic added
earlier never actually got a chance to run. esptool_with_retry now
builds global args (--chip/--port/--baud/--no-stub) and subcommand args
separately and always concatenates them in the right order, instead of
relying on call-site ordering of a single flat arg list.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
run_streamed's failure path only reported "Command exited with exit status:
N" — the real stderr (already captured line-by-line into job.log_tail for
the UI's live poll) never made it into the error that gets logged to
journald. A real esptool failure just now showed only the bare exit code,
with esptool's actual error text sitting in-memory, visible in the UI but
not diagnosable from the server logs.
Now includes the last 10 log_tail lines in the returned error, so the
actual tool output shows up in journalctl too.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
The step-3 template's condition for showing the picker vs. the progress/
result view was `!flashJob?.active && flashJob?.stage !== 'done'`. That's
true for "no job started yet" (flashJob is null) — but ALSO true for a job
that just FAILED (active:false, stage:'failed'), since 'failed' !== 'done'.
So a failed flash silently reverted to the family/board picker instead of
showing the failure state (error message + log tail) — reported live as
"it went to the download screen and then back to the flash screen" with no
visible error.
Now shows the picker only when no job has been started yet (`!flashJob`);
once a job exists, the progress/result view is always shown, whether it's
still running, succeeded, or failed — the existing error/log-tail markup in
that view already handles all three, it just wasn't being reached.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
The "couldn't confirm the board automatically" warning was checking the
display label text (/v3/i, /v4/i) instead of the same vid:pid table the
backend actually uses to resolve the board. A Heltec V3's CP2102 bridge
chip reports "CP2102 USB to UART Bridge Controller" in its USB strings, not
"Heltec", so meshDeviceImages.ts's fallback label ("LoRa radio (CP2102
serial)") never matched the regex — showing the low-confidence warning (and
leaving the board picker empty) even though the backend's
resolve_flash_board can safely auto-detect V3 via vid:pid 10c4:ea60.
Now checks the same vid:pid directly from detected_device_info, matching
mesh::flash::resolve_flash_board exactly. V4 still has no auto-match entry,
same as the backend — its vid:pid (303a:1001) is the ESP32-S3's generic
native-USB descriptor, not V4-specific, so manual selection is still
required there.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Three real incidents from live-testing the flash feature on archy-x250-dev,
each traced through logs on the node and fixed at the root:
- A failed flash left the mesh listener auto-resuming into a reconnect loop
whose backoff reset to its 5s minimum on any momentary connection, even
mid-boot-loop — every retry's open() toggles DTR/RTS, which resets many
ESP32 boards, so the retries were themselves sustaining the loop. Backoff
now only resets after a session runs stably for 20s+, and the flash job
no longer auto-resumes the listener after a failure (only on success,
after a settle delay).
- The HTTP client's blanket 30s request timeout covered entire downloads
(Meshtastic's zip is ~170MB), killing large transfers mid-stream; fixed
with a per-chunk stall timeout instead of a fixed total-transfer cap. But
the download's initial request had no timeout at all, so a slow-to-start
server hung it forever — wedging the single-flash-job guard permanently
("already in progress" on every subsequent attempt). Fixed with a bounded
wait for the response to start, plus an absolute ceiling around the whole
job as a last-resort safety net.
- archy-rnodeconf's PyInstaller freeze broke its own internal esptool
invocation (sys.executable pointed at the frozen binary itself instead of
a real interpreter) — fixed via a new runtime hook. esptool's own
auto-reset-into-bootloader handshake is separately known to be flaky on
some CP2102/CH340 boards; it now retries once at a conservative baud
rate instead of failing outright, and failure logs show the full error
chain instead of just the outer context message.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
The gateway crash-looped dialing bitcoind at host.archipelago:8332 (the
host gateway IP, where bitcoind does not listen). Root-cause fix, three
parts:
- fedimint-gateway manifest: --bitcoind-url now comes from
$FM_BITCOIND_URL, filled by a {{BITCOIN_HOST}} derived-env — works on
Knots, Core, or any future Bitcoin distro.
- fedimint manifest: same derived-env replaces the hardcoded
FM_BITCOIND_URL=http://bitcoin-knots:8332 environment entry.
- orchestrator: removed the hardcoded FM_BITCOIND_URL=bitcoin-knots
override that clobbered the derived-env, and bitcoin_host() now
accepts any running bitcoin*/bitcoin container (excluding -ui and
archy-* sidecars), preferring the known names in order.
Catalog regenerated + signed (nodes install from the signed catalog, so
the manifest fixes only reach them via this regen).
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
The double-share/double-pay chain (user hit it live, 2026-07-22):
ShareModal's already-shared lookup compared the slash-stripped stored
path against the leading-slash filepath — never matched — so every
re-share minted a NEW catalog entry with a new id, and the buyer's
owned-guard (keyed by id) saw the duplicate as unowned and paid again.
Three independent walls now: (1) ShareModal normalizes both sides so
re-shares reuse the entry; (2) content_server::add_item dedupes by
filename server-side (updates in place, keeps the id so buyers' owned
records stay valid); (3) the buyer REFUSES to pay for content it
already owns — matched by (onion, content_id) OR (onion, filename) —
and serves the cached copy instead, before any ecash is minted.
Purchases also auto-file into Photos/Music/Documents on the node (same
buckets as the Cloud view, collision-safe naming) so bought files show
up where files live on every device, and Cloud gains a Paid Files tab
listing every purchase (name, size, sats paid, date) with in-app view.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
- LND watchdog: framework-pt's LND sat wedged 14h (RPC up, server never
ready, channels inactive) with nothing noticing. 15 consecutive bad
minutes now bounce the container automatically (30min cooldown) —
silent multi-hour Lightning outages become self-healed blips.
- Send modal: Auto tab hidden; Ecash splits into Cashu and Fedi (new
wallet.fedimint-send RPC wrapping the existing spend_from_any); both
rails render the generated token as a scannable QR alongside the
copyable text.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
The mesh listener spawns /usr/local/bin/archy-reticulum-daemon for
Reticulum sticks, but the ISO never shipped it (framework-pt connected
its RNode only after a hand-copy, 2026-07-22). Bundled from the build
host with a loud warning when absent.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
'Insufficient balance: need 80 sats, have 0 sats' reached the UI as
'Operation failed. Check server logs.' — the sanitizer allowlist didn't
know wallet errors. Also allowlists the calm Lightning still-starting
notice, which it would have swallowed the same way.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
On the companion (plain-http LAN = no secure context = no live camera)
the photo path IS the scanner, and qr-scanner's single wasm pass often
misses the dense QR of a full BOLT11 invoice. Android WebView's native
BarcodeDetector handles them easily — try it first, wasm as fallback,
plus a 'Reading photo…' status.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
The Channels panel's 'Funding tx in Mempool' link still hardcoded the
local app (missed in the explorer rollout): now it routes like every
other tx link — local Mempool when running, else the saved external
explorer, with the first-time consent modal setting it up and then
opening the tx. The consent modal moves to z-3600 so it renders above
the Wallet Settings modal that can trigger it.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Fleet log sweep (2026-07-22): (1) recovery paths podman-start'ed
containers that were already running, producing hundreds of benign but
scary conmon 'Failed to create container' + cgroup Permission-denied
pairs per node per day — both paths now check state first; (2) the 30s
companion-reconcile loop retried registry pulls/builds forever against
unreachable registries (~174×/image/day on an offline node) — failing
rounds now back off exponentially to a 1h cap.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Outside-close listeners move from click to pointerdown: pointerdown
fires before the open-toggle re-render, so the kiosk's slow software
compositing can no longer detach the click target mid-flight and close
the menu the instant it opens. color-scheme:dark (CSS + meta) pins every
native control — select popups, scrollbars, pickers — dark regardless of
the user's OS theme; explicit select/option colors cover Firefox.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Three silent failure modes killed nostr peer requests (analyzed from the
live code 2026-07-22): (1) nothing ever polled the relays except the
manual Federation Poll button — a 5-minute background poll now fetches
inbound requests and nudges the websocket when something lands (the
handler's discoverability gate still applies); (2) handshake send/poll
used only the two hardcoded config relays (one defunct) and ignored the
user-managed relay list — every nostr op now uses the merged set;
(3) publish errors were swallowed (let _ =) so 'ok' was reported even
when no relay accepted the event — now a delivery failure is an error
the UI shows.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Reachability probes ran one at a time with a 30s Tor timeout each, so
Refresh sat disabled for N-offline-peers × 30s. Now the list renders and
the button re-enables immediately; probes run concurrently and fill the
dots in as they land.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
BaseModal becomes a flex column: title row and the new #header slot
(tabs) stay fixed at the top, #footer (action buttons) fixed at the
bottom, only the default slot scrolls (default max-h 90vh unless the
caller sets one). Wallet Settings migrates: tabs pinned, four duplicated
in-pane Close rows collapse into one pinned footer that carries the
active tab's primary action.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
pine/mempool get explicit icon entries (their extensions aren't .png, so
the default guess 404'd on every render). filebrowser-client: central
authedFetch does ONE transparent re-login when the short-lived JWT
expires (an expired cookie previously kept _authenticated=true and every
Files-card poll 401'd forever), plus a 60s login cooldown so a missing
filebrowser doesn't spam either.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
detected_device_info now carries plugged_at (the /dev node's creation
time; udev recreates it per plug). Dismissals store (path -> plugged_at),
so swapping sticks or a fast unplug/replug between status polls can no
longer be suppressed by an old 'Not Now' (v1 path-only dismissals are
abandoned wholesale).
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
The QR mirrored the browser origin — an operator browsing over Tailscale
handed the phone a 100.x address it has no route to, so pairing silently
never connected (reported 2026-07-22; the 'random password' alongside it
was the device token working as designed). system.get-hostname now also
returns the default-route LAN IPv4; the QR substitutes it (or the mDNS
name) whenever the origin is localhost or a CGNAT/tailnet 100.64/10 IP.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Linux double-opens ttys, so a probe racing the reconnect loop corrupted
both handshakes into silence (framework-pt, real Reticulum stick). Three
attempts 7s apart land in the listener's backoff gaps.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Two real install failures from .116 today: (1) the hard "ElectrumX must
be running" gate — but mempool-api reconnects to electrum on its own and
a resync can take days, so it's now a warning; (2) a 10s podman-ps probe
timeout tripped by ElectrumX compaction disk load — now 45s.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
AppLauncherOverlay sat at z-2400 under BaseModal's z-3000, so an app
opened from e.g. the Transactions modal loaded invisibly underneath it.
z-4000 lets the existing enter animation play over the modal; closing
the app returns to the modal you came from.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Pruned nodes can't run the Mempool app, but tx links blindly opened it
anyway. Now: local app when running; otherwise an external explorer
(default tx1138.com) behind a one-time amber consent modal that spells
out what the other server's operator learns (tx of interest + IP) and
lets the user point at their own instance (placeholder mempool.guide).
Wallet Settings gains an On-chain tab (explorer URL + don't-warn toggle);
tabs renamed Cashu/Fedi so five fit in the row.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Backend streams LND /v1/transactions/subscribe (fires on mempool arrival
and each confirmation) and nudges the /ws/db revision per event; the Home
wallet card subscribes and refetches (debounced 800ms). An incoming
broadcast now appears while the 30s poll is still asleep. Reconnects
forever with capped backoff when LND is down/locked/absent.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
LND's RPC answers before its p2p server finishes loading, so connect/open
during that window failed red with the raw "server is still in the
process of starting". Now: quiet ~30s retry first; if still starting, a
calm amber "still finishing its startup" notice instead of an error.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
- Android/rust/archy-fips-core: leaf-only fips node as a JNI cdylib (fips
pinned to the fips-native fork rev with VpnService fd support), built by
gradle via cargo-ndk (arm64), tested on host
- ArchyVpnService: split-tunnel VpnService routing only fd00::/8 (MTU 1280,
foreground specialUse); FipsManager handles the one-time VPN consent and
silent auto-start — no settings surface at all
- pairing QR now fully configures the mesh: fnpub/fip/fhost/fudp/ftcp plus
fanchors (the node's seed-anchor list, npub@addr/transport) so the phone
can rendezvous through public anchors when the LAN endpoint is unreachable
- default seed anchors gain the two dual-transport join.fips.network test
anchors (23.182.128.74:443/tcp, 217.77.8.91:443/tcp); anchor adverts are
Nostr kind-37195 events
- device token rides the password field end-to-end: backend accepts tokens
wherever it accepts the password, so scan = instant login (WebSocket auth
+ WebView form injection unchanged); token logins skip TOTP
- ServerEntry.meshIp + IPv6-bracketed URLs; WebView retries the mesh address
on main-frame errors, auto-login and origin checks honor it
- companion v0.5.0 (versionCode 20), arm64 abiFilter; FipsNative.available
gates everything so non-arm64 still runs as a plain companion
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
- auth.createDeviceToken / listDeviceTokens / revokeDeviceToken RPCs; only
SHA-256 hashes persist in data_dir/device-tokens.json
- auth.login accepts {token} (same rate limiter, skips TOTP like remember-me)
- pairing QR now carries name (server name, fallback "My Archipelago"),
tok (instant login), and FIPS mesh params from new fips.pair-info RPC
(npub, fips0 ULA, transport ports)
- companion onboarding drops the WireGuard install/tunnel screens — remote
access moves to the FIPS mesh embedded in the companion app
- fix: fips daemon UDP bind now 2121, matching the published container port
and fleet rosters (was upstream's 8668 — inbound UDP was dead on bridged
installs, mesh silently rode TCP 8443)
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Plugging in any LoRa radio now surfaces the device setup modal EVERY time
(dismissals clear on unplug; works while mesh is enabled; 2-poll debounce
so ordinary reconnect blips don't flash it), showing what's currently on
the stick before anything is written:
- mesh.probe-device RPC: identifies the firmware read-only in the same
Reticulum->Meshcore->Meshtastic order as auto-detect. Meshtastic yields
region/modem-preset/channels (want_config is a read); MeshCore yields
name/node-id + firmware version via the previously-unused
CMD_DEVICE_QUERY; RNode via the bare KISS DETECT (no daemon spawn).
Path must be a detected candidate port; the live session's port refuses.
- "Keep As Is": manage_radio=false persists in MeshConfig and the session
skips every on-connect config write (region, channel, PHY params, advert
name) — the radio runs exactly as flashed, hot-swappable.
- "Set Up with Archipelago Settings": second screen shows the params that
will be applied (channel, region, the node's persisted RF params - e.g.
the validated Portugal preset - with the per-region community plan as
fallback) before writing anything.
- Stale-type fix: disconnect now resets device_type/firmware_version, so
a swapped stick no longer shows the previous radio's firmware; probed
kind pins device_kind so the right probe runs first on connect.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Both lived only in RAM: every archipelago restart/reboot wiped the whole
chat history (user-reported), and — worse — reset the per-target outbound
sequence counters, so peers' (sender_pubkey, sender_seq) dedup silently
dropped the first messages sent after a reboot as replays.
mesh-messages.json in the data dir (0600 — DM plaintext), restored in
MeshService::new before the listener spawns; a 5s debounced persister
task snapshots at one choke point instead of hooking every mutation path
(store, delivered/transport/encrypted stamps, edits, deletes, prunes).
Atomic write-then-rename; corrupt/missing file skips restore instead of
blocking mesh startup.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Image default is beam 5 on x86 (1 on ARM). Benchmarked on framework-pt
(i5-1135G7, base-int8, real speech): beam 1 transcribes identical text
~45% faster; extra CPU threads made it slower, so only the beam changes.
App revision 3.4.2 > image 3.4.1 so catalog-driven nodes roll the args
change; a 3.4.1-1 suffix would semver-compare LOWER and never ship.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
The seeded announce automation blocked state transitions out of None/
unavailable — but None is exactly the sensor's state before the first
received message (and after the in-memory store restarts empty), so a
fresh node's first DM was silently swallowed (framework-pt 2026-07-22).
Only 'unknown' (the HA-restart marker) still blocks; rest sensors don't
restore state, so restart announce-storms remain impossible. Seeder
upgrades an already-seeded automations.yaml by replacing exactly the v1
clause, leaving user edits untouched.
Sensor scan_interval 30->15s: the sensor only carries the latest message
id, so two messages inside one poll window coalesce into one announce —
halving the window halves both the lag and the coalescing odds.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
The Home wallet card counted every incoming tx with num_confirmations < 3
in the pulsing 'Incoming N' badge. Lightning history hardcodes 1 conf and
ecash/fedimint/ark receives are normalized to 1 conf, so instant payments
qualified permanently — old receives showed as 'incoming' forever (seen
on .228 with week-old lightning orders).
- On-chain keeps confirmation-based logic (< 3 confs, expires naturally).
- Instant rails (lightning/cashu/fedimint/ark) now surface in the incoming
panel only for 5 minutes after receipt — the nice arrival moment without
the perpetual pending state.
- Panel rows: 'Unconfirmed / N conf' badge and mempool link are now
on-chain-only; instant rows get a rail badge instead.
- Home now polls wallet balances+transactions every 30s (like Web5.vue),
so pending on-chain receives actually flip to confirmed and the badge
appears/expires without a manual wallet action.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
