lfg2025/archy-messh
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity
archy-messh/firmware/platformio.ini

22 lines
804 B
INI
Raw Permalink Normal View History

feat: Phase 1 firmware — time-multiplexed tri-protocol RX scanner First Phase 1 increment toward the single-device 3-in-1: one Heltec V3 (ESP32-S3 + single SX1262) rotating the radio through the Meshtastic / MeshCore / Reticulum PHY presets, logging every raw packet it demodulates per dwell window. No framing/crypto/bridge yet — proves the RX loop first. Validated on hardware: radio.begin() clean, all three presets cycle, and the Meshtastic window received live broadcast packets (-36..-41 dBm). The single-radio time-multiplex premise (ARCHITECTURE.md §2) holds. MeshCore sync word and Reticulum PHY are flagged placeholders in CONFIGS[]. Deps pinned (espressif32 7.0.1, RadioLib 7.7.1). Adds venv/pycache/storage to .gitignore. Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
2026-07-01 15:45:36 +01:00
; archy-messh Phase 1 firmware — single Heltec WiFi LoRa 32 V3, one SX1262
; time-multiplexed across the Meshtastic / MeshCore / Reticulum PHY configs.
;
; See ../docs/ARCHITECTURE.md §2-§3 for why Phase 1 is a single time-multiplexed
; radio (Option A) rather than the 3-separate-boards host bridge of Phase 0.
;
; Versions pinned exactly — do not float.
[env:heltec_wifi_lora_32_V3]
platform = platformio/espressif32@7.0.1
board = heltec_wifi_lora_32_V3
framework = arduino
monitor_speed = 115200
monitor_filters = time, default
build_flags =
-D ARCHY_MESSH_FW
feat(firmware): MeshCore message RX — decrypt DMs addressed to us - vendor orlp/ed25519 (lib/ed25519, MIT — the exact lib MeshCore uses) for Curve25519 ECDH key exchange; switch identity/advert signing to it (same seed -> same pubkey, so peers still recognise us; sigs are byte-identical) - store pubkeys from heard MeshCore adverts (contacts table) so a DM's 1-byte src_hash can be resolved to a full sender key - decode PAYLOAD_TYPE_TXT_MSG: ECDH shared secret, HMAC-SHA256 MAC check, AES-128-ECB decrypt, parse timestamp+text, drive the message modal - verified end-to-end: real MeshCore node -> "hello from HP Pro Desk" decoded Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
2026-07-01 18:30:20 +01:00
-D ED25519_NO_SEED ; vendored orlp/ed25519 without host-only seed.c
feat: Phase 1 firmware — time-multiplexed tri-protocol RX scanner First Phase 1 increment toward the single-device 3-in-1: one Heltec V3 (ESP32-S3 + single SX1262) rotating the radio through the Meshtastic / MeshCore / Reticulum PHY presets, logging every raw packet it demodulates per dwell window. No framing/crypto/bridge yet — proves the RX loop first. Validated on hardware: radio.begin() clean, all three presets cycle, and the Meshtastic window received live broadcast packets (-36..-41 dBm). The single-radio time-multiplex premise (ARCHITECTURE.md §2) holds. MeshCore sync word and Reticulum PHY are flagged placeholders in CONFIGS[]. Deps pinned (espressif32 7.0.1, RadioLib 7.7.1). Adds venv/pycache/storage to .gitignore. Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
2026-07-01 15:45:36 +01:00
lib_deps =
jgromes/RadioLib@7.7.1
feat: trippy acid-house display UI (RMC) on the OLED Add SSD1306 UI to the Phase 1 scanner: an animated acid smiley inside expanding psychedelic rings, an 'RMC' (Reticulum/Meshtastic/meshCore) strobe header, and three live network rows with per-network packet counts and RX activity blips. Scan loop made non-blocking (millis-based dwell) so the display animates smoothly (~20fps) while the radio rotates. Honest note in-code: the single SX1262 is time-sliced across the three PHYs (ARCHITECTURE.md §2); the UI shows all three armed but true concurrent RX needs added radios (Phase 2). Pins U8g2 2.36.18. Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
2026-07-01 16:02:33 +01:00
olikraus/U8g2@2.36.18
feat(firmware): MeshCore advert TX + Meshtastic text send - MeshCore: fix PHY to live narrowband config (869.618/62.5/SF8/CR5), read off the test node's SELF_INFO — old 869.525/250/SF11 heard nothing - MeshCore: on-chip Ed25519 identity (rweather/Crypto, NVS-persisted) and signed ADVERT TX (verified valid + received by a real node) — the bridge now shows up as a MeshCore contact - Meshtastic: send text messages (portnum 1) reusing the announce path - serial TX console with per-network targeting ("T:hi" / bare = all) - longer dwell (3000ms) to sit through flood-rebroadcast bursts Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
2026-07-01 18:07:05 +01:00
rweather/Crypto@0.4.0 ; Ed25519 / Curve25519 for MeshCore identity + signing
Reference in New Issue Copy Permalink