archy went deaf to inbound LoRa packets after every config write.
A config write (region/channel/owner) reboots the radio, which resets
the firmware PhoneAPI to STATE_SEND_NOTHING; it won't stream received
packets again until the client re-sends want_config. archy ignored
FromRadio.rebooted (field 8) so never resubscribed — which is why old
messages only arrived after a full restart (restart = fresh want_config).
- meshtastic.rs: handle FROM_RADIO_REBOOTED -> set pending_reinit;
try_recv_frame re-sends want_config to resubscribe the packet stream.
Add send_keepalive (bare heartbeat) and pin modem_preset=LONG_FAST in
set_lora_region so all radios share frequency.
- listener/session.rs: MeshRadioDevice::send_keepalive; 10s sync_timer
sends a keepalive each tick (insurance vs 15-min idle serial close).
- mod.rs send_message: device-aware send — Meshtastic archy peers get a
plain TEXT_MESSAGE_APP DM (firmware PKC E2E); Meshcore archy peers keep
the typed envelope (no meshcore regression).
Verified: .198->.228 directed DM arrives as RECEIVED enc=True
peer="Arch Optiplex"; all 3 nodes (.116/.198/.228) + 3ccc hear each
other. Binary 737b16c3 deployed+active on all three.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
- send_message now sends archy↔archy plain text as a native TEXT_MESSAGE_APP
DM (firmware PKC-encrypts E2E), not wrapped in the binary typed envelope
that silently broke archy↔archy LoRa delivery. Archy peers' Sent rows are
marked encrypted so the E2E pill shows; rich typed msgs still use the
typed-wire path.
- Add a software radio-reboot to recover a wedged/RX-deaf radio without
physical access (and for the Device-tab settings panel): driver reboot()
via AdminMessage reboot_seconds=97 (verified vs meshtastic/protobufs),
MeshCommand::RebootRadio, MeshService::reboot_radio, RPC mesh.reboot-radio.
- Handoff doc: docs/SESSION-1.8.0-OTA-PROGRESS.md "RESUME HERE" — RF link is
the proven blocker (radios not hearing each other); modem_preset mismatch
is the prime suspect; on-device Meshtastic-app check + fix plan documented.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
ensure_lora_region previously force-overrode the device's region with the
mesh-config region (EU_868) whenever they differed — which would shove a US/ANZ
user's radio onto EU_868: an illegal band that also cuts it off from its local
mesh. Off-the-shelf interop must respect whatever region the user flashed.
Now: a radio that already reports a REAL region (US, EU_868, ANZ, …) is left
untouched. We only set a region when the device reports UNSET (a fresh radio is
RF-silent and can't mesh at all), using the operator-configured region as the
fallback. Unknown/None (never reported) is also left alone. Pairs with the
default-channel change so a meshtastic archy node behaves like a stock device.
cargo check green (built into the same binary as the channel fix).
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
Make a meshtastic-equipped archy node work like a stock Meshtastic device AND
keep the private archy group, instead of being isolated on a custom primary:
- slot 0 (PRIMARY) = the DEFAULT public channel (empty name + default key) →
interoperates with every off-the-shelf device on LongFast and picks up
default-channel users; our NodeInfo broadcasts ride here like normal.
- slot 1 (SECONDARY) = "archipelago" (deterministic psk) → private archy↔archy.
Previously the driver set "archipelago" as the PRIMARY, isolating archy from the
public mesh. Now ensure_channel writes at most one channel per call (default
primary first, then archipelago secondary), reusing the existing reboot→
reconnect→re-check loop so it converges in ≤2 cycles without reboot-looping;
primary_is_default() accepts the default key in 1-byte or expanded form so a
stock radio is never needlessly rewritten. set_channel generalized to
(index, name, psk, role); want_config parse tracks both slots.
MeshCore needs no change — it never overrides channels (ensure_channel is a
no-op) and already rides MeshCore's default Public channel off the shelf.
cargo check green. NEEDS radio verify on .116/.198 (default-channel RX + archy
group on the secondary). Channel provision cap (3) covers the 2-write migration.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
Mesh/federation messages between co-located nodes were always falling back to
Tor because the FIPS overlay had no direct peering — every node depended on the
global anchor's spanning tree, and when that anchor link flaps a node is
isolated and all FIPS dials time out. (Diagnosed live on .116/.198: pure-FIPS
direct peering over UDP 8668 fixes it — 2.5ms vs timeout.)
Generalize the manual fix: in the existing 5-min FIPS seed-anchor apply loop,
also auto-connect every federation peer the PeerRegistry knows both a LAN
address AND a FIPS npub for, dialing its FIPS UDP transport (port 8668) at its
LAN IP via the same idempotent `fipsctl connect` path (new
anchors::lan_fips_anchors). This is FIPS's own transport over the LAN — NOT
Tailscale, NOT the HTTP/LAN messaging port. Transient (recomputed each tick from
live mDNS discovery, never persisted) so changing IPs self-correct. Remote peers
with no LAN address are untouched (still routed via the anchor).
Registry Arc hoisted out of the transport-init block so the loop can read
all_peers(). cargo check green.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
The synthetic meshcore-style frame the meshtastic driver builds can't carry the
radio's PKI-encryption status, so received meshtastic DMs never lit the E2E pill.
Thread it out-of-band: the device records `last_rx_encrypted` (= packet
pki_encrypted) when it yields a text frame; the session loop reads it via
`take_rx_encrypted()` right after dispatch and stamps the just-stored received
message E2E (dispatch::stamp_received_encrypted, monotonic-id keyed). Meshcore
returns false here (its E2E is derived in the frames decrypt path). Pure
out-of-band signal — no change to the shared meshcore wire format.
Built + deployed live in binary d937814e on .116/.198. cargo check green.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
- generate-app-catalog.sh: VERSIONS map now lists the full Knots set
(29.3.knots20260508/20260507/20260210 + 29.2.knots20251110) and Core
(adds 29.2 + a `latest` entry → newest); generator forces top-level
`version` == the default entry's version (the 169ff2e2 invariant) so
regeneration is reproducible. releases/app-catalog.json regenerated.
- docs/bitcoin-version-bulletproof-rollout.md: full handoff — root causes,
fixes, current .228 state, the coordinated fleet-rollout steps (incl.
:latest repoint sequencing / fleet-safety), reindex finish procedure, and
the switch-matrix test plan.
- PRODUCTION-MASTER-PLAN.md: link the rollout doc (§6b-bis).
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
Three stacked bugs made "switch version" silently fail / crash-loop, and
the data-access mismatch corrupted a node's index during recovery attempts.
Backend renderer:
- sync_quadlet_unit ignored the per-app pinned version and re-rendered the
quadlet with the manifest's :latest every reconcile tick, reverting any
switch. Factor the install-time catalog/pin resolution into a shared
resolve_catalog_image() and call it in BOTH install_fresh and
sync_quadlet_unit.
- The renderer folded manifest `entrypoint: ["sh","-lc"]` into Exec=, which
only worked when the image entrypoint was a passthrough shell wrapper. The
versioned images use ENTRYPOINT ["bitcoind"], so Exec=sh -lc ... became
`bitcoind sh -lc ...` and crash-looped. Emit a real Entrypoint= override;
exec_changed now also compares Entrypoint=.
Images:
- Build all bitcoin images (Core + Knots, every version) as container-root
(USER removed) like the legacy :latest image. Chain data is owned by the
data_uid (container uid 102); root reads it via CAP_DAC_OVERRIDE (granted in
the manifest). A non-root USER (the previous uid 1000) can't read existing
chain data → "Error initializing block database". Still fully rootless:
container-root maps to the unprivileged host service user.
Catalog:
- bitcoin-knots versions[]: 29.3.knots20260508/20260507/20260210 +
29.2.knots20251110, "latest" tracking newest.
- bitcoin-core versions[]: add 29.2 + a "latest" entry. All images rebuilt
root and published to the mirror.
Frontend:
- AppSidebar version dropdown: rename the latest option to "Always use the
latest version" (no v prefix), fix right padding, and guarantee the current
selection matches a real option (was rendering blank).
- New InstallVersionModal: full-screen version chooser shown from the App
Store / Discover install button for multi-version apps (Bitcoin Knots/Core),
app icon + "Install <name>", latest pre-selected.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
Addresses the open Meshtastic parity bug (project_meshtastic_parity): the
running driver received nothing (`mesh.messages` stayed []) though the radio
got the packets and sends worked.
Root-cause candidate: `try_recv_frame` decoded ONE serial frame per poll and
returned Ok(None) for every non-text FromRadio frame, so the session loop slept
50ms between frames. Under Meshtastic's frequent NodeInfo/telemetry stream a
received text packet queued behind them, and read_from_radio's 64KB buffer cap
could drain (drop) it before it was ever decoded — reception silently dead while
sends kept working.
- try_recv_frame now drains a bounded batch (64) per poll, processing each
frame's side effects and returning the first inbound text frame, so a text
packet is decoded the same poll it arrives and the buffer never grows enough
to hit the lossy cap. Bounded so a continuous flood still yields to select!.
- packet_to_inbound_frame logs every decoded packet (from/portnum/payload_len)
and a "did not parse (dropped)" case, so one live radio pass is conclusive.
The rest of the decode path was verified correct by inspection (FROM_RADIO_PACKET
=2, wire-type-5 handled, parse_mesh_packet sound, 60s heartbeat present) — not a
parse bug. cargo check green. NEEDS a live radio pass on a rig that isn't .228
(off-limits: bitcoin testing) to confirm.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
Adds a per-message transport badge to archy↔archy mesh chats and fixes the
long-broken E2E badge — both meshcore and meshtastic, styled like the existing
E2E pill.
Transport pill:
- New `MeshMessage.transport` ("lora"/"fips"/"tor"), surfaced in the UI beside
the E2E badge (Mesh.vue transportLabel() → Mesh/FIPS/Tor, mesh-styles.css).
- Sent LoRa → "lora"; sent federation → finalized to the real leg ("fips"/"tor")
once the background send resolves (req.send_json transport), via an id-keyed
store update.
- Received: a post-dispatch stamp on handle_typed_envelope_direct's output
(monotonic ids) tags both transports without threading through all 20 typed-
dispatch sites — radio wrapper stamps "lora", federation injector stamps the
peer's last_transport ("fips"/"tor", default tor; the inbound HTTP carries no
FIPS-vs-Tor signal).
- Plain native/channel LoRa frames → "lora"; channel broadcasts stay non-E2E.
E2E pill fix:
- `encrypted` was hardcoded false at every MeshMessage construction site, so the
UI badge (Mesh.vue `v-if="msg.encrypted"`) never showed. Now: federation
envelopes are E2E (identity-signed over an encrypted transport); the meshcore
native-DM receive path already had a real `encrypted` flag (now also tagged
with transport). meshtastic-PKI radio E2E flag threading is a noted follow-up.
Backend cargo check + frontend vue-tsc build both green. Needs a live radio +
multi-transport pass on .116/.228 to confirm end-to-end (see
project_transport_pill / project_meshtastic_parity).
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
The knots versions[] marked 29.3.knots20260508 as default while the
top-level catalog version is the floating 'latest' tag — violating the
generator's own invariant (default:true MUST equal the top-level version
so selecting it un-pins / tracks latest). Live effect via package.versions:
catalog_default_version='latest' so the UI-highlighted default actually
PINS+recreates (opposite of un-pin) and 'latest' was unreachable from the
Version & Updates card.
Add a 'latest' default entry (== the manifest's floating tag) and keep
29.3.knots20260508 as a pinnable option. Verified on .228: package.versions
now returns default=latest with 2 selectable versions.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
Two Phase-3 bats suites used `fail` (a bats-assert helper) but bats-assert
isn't installed on the alpha fleet (only bats-core), so every tripped
assertion crashed with `fail: command not found` (status 127) instead of
reporting a real pass/fail. Define the same minimal `fail() { echo ...;
return 1; }` the other suites already use (see mempool.bats). Without this
the gates were silently non-functional.
Also rewrite the obsolete "HealthCmd= implies Notify=healthy" assertion in
use-quadlet-backends-install.bats. Phase 3.4's Notify=healthy was
deliberately reverted: gating `systemctl start` on health hung boot
reconciliation for dependency-waiting apps (fedimint idles until Bitcoin
IBD; lnd until macaroon unlock), leaving units stuck "deactivating". The
renderer now emits HealthCmd= for Podman's health state but TimeoutStartSec=0
and NO Notify=healthy (quadlet.rs render() + contains_stale_health_gate()).
The test now asserts the current invariant: no backend unit gates start on
health.
Verified on the .228 canary node (ARCHIPELAGO_USE_QUADLET_BACKENDS=1):
use-quadlet-backends-install 6/6, backend-survives-archipelago-restart 3/3.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
The archy-mempool-web health_check endpoint used http://localhost:8080.
Inside the frontend image, wget resolves `localhost` to ::1 (IPv6) first,
but nginx binds 0.0.0.0:8080 (IPv4) only -> the baked HealthCmd gets
"connection refused" every probe -> container is perpetually unhealthy ->
the reconciler recreates it forever (observed on .228: mempool container
re-Started every ~3 min, Health=unhealthy). Proven live: in-container
`wget http://localhost:8080/` = refused, `wget http://127.0.0.1:8080/` = OK.
Pin the probe to 127.0.0.1 so it matches nginx's IPv4 bind. Updated both
the source manifest and the embedded copy in releases/app-catalog.json
(the catalog overlay wins over the disk manifest on fleet nodes, so the
catalog copy is the one that actually reaches .228).
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
The split-mempool-stack guard that skips the legacy monolithic `mempool`
manifest (whose container collides with its split-stack frontend member
`archy-mempool-web`) only ran over DISK manifests. On catalog-driven nodes
(no disk manifests — e.g. the Phase-3/registry-manifest path), the legacy
`mempool` manifest arrives via the registry-catalog overlay AFTER that
guard, so both `mempool` and `archy-mempool-web` end up owning container
`mempool` and rewrite+restart each other forever ("port binding drift" /
"network alias drift" loop observed on .228, leaving mempool down).
Enforce the guard once more over the merged (disk + catalog) manifest set:
drop the `mempool` umbrella whenever all three split members are present.
Installing `mempool` assembles the split stack, so `archy-mempool-web`
owns the frontend container either way.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
The mempool manifest + embedded catalog declared the frontend container
port as 4080, but mempool-frontend nginx listens on 8080 (the stack
creates it as -p 4080:8080 with FRONTEND_HTTP_PORT=8080, see
api/rpc/package/stacks.rs). So every reconcile rendered the quadlet as
PublishPort=4080:4080, disagreed with the working 4080:8080 container,
and restarted it ("port binding drift" -> "host port 4080 did not become
reachable within 5s" -> "host listener disappeared; restarting") in a
perpetual loop on .228. Correcting the manifest container port to 8080
makes the rendered quadlet match reality so the drift/restart loop stops.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
On NAT'd nodes that can reach the iroh federation neither directly nor
via iroh's public relays, fmcd's embedded iroh networking enters a
relay/hole-punch reconnect hot-loop that pegs its entire CPU allotment
indefinitely (observed ~1 core sustained for 4 days on a Tailscale node,
while LAN nodes that reach the guardian directly stay <3%). fmcd 0.8.0
exposes no iroh/relay knobs, so:
- fmcd-run now samples fmcd's own CPU and restarts it when it stays near
its allotment for ~15 min (a restart demonstrably clears the stuck iroh
state; real work is bursty and never flat-pegs a core for minutes).
- Lower cpu_limit 1 -> 0.25 core so a stuck instance can't starve the
node (steady-state is <3% of a core; joins are brief).
Ships as fmcd:0.8.1 (launcher-only rebuild, same fmcd binary). Bumped the
image pin + cpu_limit in the manifest, image-versions.sh, the embedded
catalog manifest (releases/app-catalog.json), and the UI catalogs.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
WS-F #10: a netbird reinstall that adopts a leftover running container
skipped ensure_manifest_certs, so when its data dir was wiped the self-
signed tls.crt/key were never regenerated; the next nginx.conf rewrite +
restart then died on the missing cert (proxy 502, login broken). The
Running branch of ensure_running_with_mode now calls ensure_manifest_certs
before ensure_manifest_files, mirroring prepare_for_start's certs-before-
files ordering. Idempotent: a no-op when crt+key already exist.
Live-validated on .228: deleted netbird tls.crt/key under a Running
container; reconciler regenerated a fresh CN=<host_ip> self-signed cert
(1000:1000), https :8087 = 200.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
Region (EU_868) + shared channel "archipelago" auto-provisioning shipped in
8fdb45e8 and riding the rolled #9 fleet binary (0060dcd6). Discovery, RF, and
sending verified on .116+.228; the one open blocker is the running driver not
surfacing received messages. Slotted after WS-F #9–11.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
Fresh Meshtastic radios ship region-UNSET (RF-silent) and on mismatched
channels, so nodes only ever saw themselves. Bring them to MeshCore parity
using the official Meshtastic admin API:
- Auto-provision LoRa region (set_config, AdminMessage field 34) from a new
mesh-config `lora_region` (e.g. EU_868) when the radio's region differs.
- Auto-provision a shared primary channel (set_channel, field 33) with a
PSK derived deterministically from channel_name, so every node converges on
one mesh — the parity equivalent of MeshCore's named "archipelago" channel.
- Read current region/channel from want_config; only write when different
(no reboot loop); cap attempts so a radio that won't persist can't loop.
- Active NodeInfo advert scaffolding + aggressive serial drain.
Verified on .116+.228: region+channel persist, discovery works (both see each
other as named reachable contacts), bidirectional RF + sending confirmed.
Receiving in the running driver is still under diagnosis (instrumentation added).
Also removes the unwanted `meshtastic` daemon app from the registry (it was
never meant to be a container — native driver provides system-level support):
deletes apps/meshtastic + catalog entries (app-catalog, neode-ui, releases) +
test refs. Meshtastic stays native, like MeshCore.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
ensure_bind_mount_dirs chowned a freshly-created no-data_uid bind dir
with --reference={immediate_parent}. For a NESTED bind source like
jellyfin's /var/lib/archipelago/jellyfin/config (or netbird's .../netbird/
data), `mkdir -p` creates the intermediate <app> dir root:root too, so
referencing the immediate parent just copied ROOT — leaving the dir
unwritable and the app EACCES-crash-looping on reinstall (found by the
all-apps-lifecycle pass: jellyfin "/config/log denied" exit 139;
netbird-server "unable to open database file"). It only ever worked for
direct children of the data root (immich).
Fix: anchor to the nearest PRE-EXISTING ancestor (the rootless data root,
owned by the service user) and chown -R the entire newly-created subtree
to it. Extracted the walk into fresh_subtree_anchor() with a unit test
covering nested / direct / second-volume cases.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
Active counterpart to the read-only all-apps-matrix.bats: drives
stop/start/restart for every installed app and, under
ARCHY_ALLOW_CASCADE_DESTRUCTIVE, a FULL teardown (uninstall →
no-ghost → reinstall) — the broad coverage F needs beyond the ~8 core
suites. App set is discovered from My Apps ∩ the node catalog; reinstall
spec comes from catalog.json {dockerImage, containerConfig}.
PROTECTED by default (never cycled or torn down): bitcoin*/electrum*
(expensive resync) AND lnd/btcpay*/fedimint* (teardown = irreversible
wallet/channel/guardian loss). The user asked to protect only
bitcoin+electrum; the wallet apps are added for safety and can be
removed via ARCHY_MATRIX_PROTECT. Heavy + destructive → a supervised
pass, not folded into run-gate. Validated on .228: discovery excludes
the 6 protected installed apps; lifecycle tier cycles a single app
(botfights) stop/start/restart green; teardown gated.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
AppCard's uninstall bar was hardcoded `w-full bg-red-400/60 animate-pulse`
— a solid, full-width, red, fake-pulsing block that never moved and read
as an error, no matter the actual teardown progress (the install bar, by
contrast, renders a real percentage). Derive a truthful percentage from
the backend's existing `uninstall-stage` label — "Stopping containers
(X/N)" → 10–50%, "Cleaning up volumes" → 70%, "Removing app data" → 90%
— and render it exactly like install: neutral fill, real width + percent,
shimmer (not a fake pulse) carrying motion when a stage has no number.
Frontend-only; the backend already broadcasts these stages.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
run-gate.sh ran only the DESTRUCTIVE tier; the cascade-uninstall suite
(uninstall→no-ghost→reinstall, the #13/#14/uninstall-hang regression
guard) existed but was never enabled by the gate. Add an opt-in single
cascade pass after the 5× loop (ARCHY_GATE_CASCADE=1, requires
ARCHY_ALLOW_DESTRUCTIVE=1), counted into the pass/fail tally. Kept out
of the 5× loop deliberately — uninstall/reinstall every iteration would
balloon runtime and re-pull images; one pass guards the class. Default
gate behavior unchanged. Validated: cascade-uninstall.bats 7/7 on .228.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
Workstream F now in-progress: the immich/grafana uninstall hang →
ghost/stuck-bar/reinstall-block is root-caused (unbounded systemctl/
podman in quadlet::disable_remove) and fixed (71cc9ac4); cascade-
uninstall.bats 7/7 on .228. Records the remaining F items + the pending
gate-wiring decision.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
Uninstalling immich/grafana could hang with a frozen full-red progress
bar, leave a ghost entry stuck in My Apps, and then refuse reinstall.
Single root cause: quadlet::disable_remove() — called first in the
uninstall task (via companion + orchestrator teardown) — ran
`systemctl --user stop`, daemon-reload, and `podman rm -f` with NO
timeout. On rootless podman a generated unit can wedge in "deactivating"
while podman hangs underneath, so `systemctl stop` blocks forever. The
spawned uninstall task then never returns Ok or Err, so:
- set_uninstall_stage() (after the stop) never fires → progress frozen;
- remove_package_state_entry() never runs → entry stranded in
`Removing` → ghost in My Apps;
- the install guard rejects reinstall with "already Removing".
The spawn wrapper already reverts state on Err and removes the entry on
Ok — the only failure mode was a hang that returns neither. Bound the
teardown so it always terminates:
- systemctl stop → QUADLET_STOP_TIMEOUT, escalate to kill+reset-failed
on timeout (reuses the existing helpers);
- daemon_reload_user() → bounded systemctl_user_status (30s);
- defensive `podman rm -f` → wrapped in tokio timeout.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
§10b: replace per-app static launch-port map with a manifest-first +
non-HTTP-port-skipping heuristic (the gitea :2222 class).
§10c: generalize the un-pruned/archival Bitcoin install blocker from a
hardcoded requires_unpruned_bitcoin() match to a manifest-declared
dependency, with a clear pre-install UX.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
Banner + §8b: zombie-container guard (0a8db904, live-proven on .228) and
gitea launch-port fix (670ebb06) shipped in binary 040df5ce, rolled to
the fleet. Logs the mempool env-drift recreate-loop and nostr-rs-relay
follow-ups.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
Gitea publishes two host ports — SSH on 2222 and the web UI on 3001.
The launch URL comes from manifest_lan_address_for() (the manifest's
interfaces.main → 3001), but Gitea had no entry in the static
lan_address_for() fallback map. On a node where the gitea manifest is
absent or stale (no interfaces block), the lookup returns None and the
code falls through to extract_lan_address(), which returns whichever
port podman lists first — frequently the SSH port. Result: the app
launched at :2222 instead of :3001 (observed on tailscale node
100.82.34.38).
Add the canonical "gitea" => http://localhost:3001 entry to the static
map, matching every other core app, so the web UI is pinned regardless
of manifest presence.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
podman trusts its own state DB: when a container's conmon dies without
podman observing it (cgroup-cascade SIGKILL on archipelago.service
restart, a crash), `podman ps` keeps reporting it "Up" long after the
process is gone. The reconciler NoOp'd such a zombie forever, so a dead
dependency with no published host port never recovered.
Observed live on .228 (2026-06-25): netbird-dashboard reported "Up" with
a dead State.Pid → its nginx proxy 502'd → NetBird login broke
("Unauthenticated"). The dashboard publishes no host port, so the
Running branch had nothing to probe and never recreated it.
Add a zombie guard to the Running branch: verify the recorded State.Pid
is alive (its /proc entry exists) before trusting "running"; on a
concrete dead PID, stop+remove+install_fresh from the manifest.
Conservative by design — any uncertainty (inspect failed, PID
unparseable) assumes alive, so a transient podman hiccup never destroys
a healthy container. Unit test covers live/dead/out-of-range PIDs.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
Node apps (e.g. NetBird on :8087) terminate TLS with a self-signed cert
so the dashboard gets a secure context (OIDC / window.crypto.subtle, #15).
The WebView's default onReceivedSslError CANCELs untrusted certs, so those
apps rendered blank in the companion — exactly the netbird "won't load in
the webview" report. Override onReceivedSslError in both WebViewClients
(kiosk + in-app browser) to proceed() only when the failing cert's host
matches the connected node; reject everything else (no blanket trust).
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
netbird is fully manifest-driven (apps/netbird-*/manifest.yml via the signed
catalog): install_stack_via_orchestrator renders the 3-member stack with
generated_certs (self-signed TLS for the #15 OIDC secure context), base64
generated_secrets, and templated config — and adopts the running stack by live
container name. The hardcoded `podman run` fallback was therefore dead code on
any node with the embedded catalog (verified live: .228 https:8087 -> 200).
Removes the per-app Rust installer anti-pattern the master plan calls out:
- install_netbird_stack: orchestrator -> adopt -> bail! (no in-Rust installer)
- deletes 6 now-dead helpers (write_netbird_config_files, ensure_netbird_tls_cert,
read_or_generate_b64_secret, netbird_net_resolver_ip, detect_netbird_public_host_ip,
wait_for_netbird_oidc_ready), 3 NETBIRD_*_IMAGE consts, unused base64::Engine import
- ~485 lines removed; prod_orchestrator doc-comments updated
Behavioural parity: the manifest path already executed on the fleet, so this
changes no live behavior. The legacy #10 OIDC-readiness wait was already bypassed
by the manifest path; if that race resurfaces, add an OIDC-ready gate to the
manifest rather than resurrecting the Rust fn.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
The 5x destructive gate on heavy nodes false-failed on transient windows
during stack recovery, not real regressions:
- immich.bats: lan_address port-publish probe 30s -> 90s. The postgres->redis
->server (DB migrations on boot) stack can take >30s to republish :2283 after
a churn-induced recreate; destructive-tier immich tests already allow 180-240s.
- mempool.bats: orphan-container check now polls to steady state (<=30s) instead
of a single-shot count, which caught a recreated member briefly visible
alongside its replacement mid-reconcile.
- run-gate.sh: settle cap 180s -> 300s and also gate on immich's :2283 when
installed, so the next iteration's read-only probe doesn't race a still-
recovering stack. Settle returns the instant every probe is green.
A genuinely unexposed/orphaned/unhealthy app still fails these checks; they only
absorb the transient recreate window under sustained churn.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
NOT yet validated on a node or fleet-deployed — cargo check passes, release build
+ .228 canary validation pending. Committed as a checkpoint so the work survives.
Two fixes the immich .198 incident exposed:
Fix A (reconcile_all_with_mode): a previously-running app whose container vanished
(e.g. a wedged podman teardown cleared by a reboot) was left absent on boot. Now,
when boot reconcile would leave an app 'absent' but it was running at the last
running-containers snapshot, recreate it (install_fresh). New
crash_recovery::load_last_running_names() reads the snapshot without the PID/crash
gate (+2 unit tests). Match is exact on compute_container_name (incl stack
members); user-stopped + uninstalled apps are already excluded, so no false
positives.
Fix B (ensure_bind_mount_dirs): a freshly-created bind dir was left root:root, so a
no-data_uid app running as container-root (→ host rootless user) hit EACCES and
crash-looped (the exact immich upload-dir failure). Now a newly-created bind dir
for a no-data_uid app is chowned via --reference=<parent> to match the rootless
data root — no host-uid guessing, only fresh dirs (no regression for existing
installs).
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
Two console-noise fixes from a live error dump:
- remote-relay.ts reconnected on a FIXED 5s interval with no backoff, so when
the backend is briefly down it floods the console/network with failed-WS
attempts for the whole outage. It's a secondary feature (companion input), so
add exponential backoff 1s->30s (mirrors websocket.ts), reset on open/start.
- cryptpad's catalog/marketplace entries pointed at a non-existent
/assets/img/app-icons/cryptpad.webp -> a 404 on every marketplace render.
Point it at the existing default icon (handleImageError swapped to it anyway).
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
The global error handler (Vue errorHandler + window error + unhandledrejection)
fired a red 'Something went wrong: <raw msg>' toast AND an auto on-device overlay
on every caught error — deliberately loud for bug-bash, but it surfaces benign,
non-actionable noise (e.g. a transient RPC rejection during a ws reconnect, or
the service worker failing to register over a self-signed cert) right in the
user's face.
Demote the catch-all to SILENT capture: keep console.error + the
window.__archyErrors ring buffer, and expose the screenshot-able overlay
on-demand via window.__archyShowErrors() — but never auto-pop. Components that
need to report a specific, actionable failure still call toast.error() directly.
Also filter known-benign environmental noise (PWA service-worker registration
failing over a self-signed cert — needs a trusted cert, #56) so it doesn't even
occupy a ring-buffer slot and push out real errors.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
The per-app suites cover ~8 core apps in depth; nothing covered the ~30 others
(jellyfin, vaultwarden, penpot, nextcloud, grafana, …). all-apps-matrix.bats
derives the app set from server.get-state package-data (no hardcoded list) and
asserts baseline health across EVERY installed app:
- settles to a non-transitional state within a window (the #13/#14 stuck-ghost
class, generalized fleet-wide — installing/removing that never settles)
- not in error/failed
- reports a recognized (non-garbage) state
- every running UI app (manifest ui=="true") exposes a non-null lan-address
(the immich/port-drift unreachable-UI failure, generalized to all UI apps)
Read-only, so it joins run.sh/run-gate.sh on every node and grows coverage as
nodes install more apps. Verified 5/5 on .228 (17 apps) and .116 (20 apps).
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
The 5x gate is DESTRUCTIVE-only and never exercised uninstall/reinstall — where
the worst field bugs lived (#13 app ghosting in My Apps after uninstall, #14
reinstall stalling on stale state). New cascade-uninstall.bats drives the full
teardown path on a throwaway app (default grafana, precondition-skips if already
installed so it can't destroy real data) and asserts:
- fresh install reaches running via a truthful, non-silent progression
- uninstall makes the entry DISAPPEAR from server.get-state package-data
(the literal My Apps map) — no ghost, no stuck uninstall stage
- container + (on-node) data dir are gone
- reinstall returns to running
- node left as found
Opt-in via ARCHY_ALLOW_CASCADE_DESTRUCTIVE=1; not yet folded into the canonical
gate. Verified 7/7 against .228.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
ensure_running_container_ownership re-probed and re-attempted the in-container
chown on every reconcile pass. For a mount that can't be re-owned from inside the
userns (observed: mempool-api /data -> 'Operation not permitted'), this burned
CPU and logged a WARN on every pass, forever (~6x/30min on .228/.116).
Remember hard chown failures in a process-lifetime set keyed by (container-id,
dest) and skip the probe+chown for known-unrepairable mounts. Keyed by Id (not
name) so a recreated container gets a fresh repair attempt. Verified on .116:
one recorded failure at startup, then silent across subsequent reconciles.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
The reconnect banner showed 'Connection lost'/'Reconnecting' instantly on every
socket close, even ones that recover in 100ms-2s (load spikes, Tailscale/relay
TCP resets). On a healthy node the drops are brief and self-healing, but each one
flashed a jarring banner, reading as constant instability.
Debounce the transient banner by 2.5s: only surface after the connection issue
persists past the grace window; hide immediately on recovery. Deliberate server
lifecycle transitions (restart/shutdown) bypass the debounce and still show at
once. A genuine persistent outage keeps isOffline true and surfaces after 2.5s.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
Force-add the gitignored releases/app-catalog.json so nodes resolve
146.59.87.168:3000/lfg2025/archy/raw/branch/main/releases/app-catalog.json
(currently HTTP 404 → disk-manifest fallback). Embedded-manifest delivery
is default-on; origin-wins overlay with disk as fallback. Unsigned (migration
window accepts unsigned). Includes netbird x3 manifests.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
handle_package_uninstall lumped every teardown failure into one `errors` vec
and returned Err on any of them BEFORE removing the package state entry — so a
non-fatal cleanup hiccup (a slow/failed `sudo rm -rf` of a large data dir, a
volume/network removal) left the app's containers gone but its entry in
package_data → a ghost in My Apps, and the spawned task reverted it to Installed.
Split the failures: container removal that even force-rm can't complete (app
genuinely still present) keeps the entry + returns Err; everything after the
containers are gone is best-effort. Remove the state entry as soon as the
containers are gone — BEFORE the slow volume/data teardown — so My Apps updates
immediately and residue can never ghost the app. set_uninstall_stage is a no-op
once the entry is gone (if-let guard), so the later stages don't re-create it.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
wait_for_manifest_host_ports TCP-connect-probed every published port, including
UDP/SCTP. netbird's 3478/udp STUN can never answer a TCP connect, so the probe
failed forever and drove an endless host-port repair/reconcile loop on .228
(netbird-server restarting ~every 60s). Filter to tcp (empty protocol = tcp).
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
Turn on registry-distributed manifests for all apps: generate-app-catalog.sh now
embeds each apps/<id>/manifest.yml by default (EMBED_MANIFESTS opt-out), so nodes
install from the signed catalog (origin-wins overlay, disk = fallback) with no
OTA-shipped disk manifest. main.rs awaits a bounded (25s) refresh_catalog before
load_manifests so a fresh boot overlays the latest embedded catalog instead of a
restart later; offline/ISO boot falls through to disk and never hangs.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
image_exists ran `podman image inspect <image>` via .status() (inherits the
service stdout) with no --format, so every hit dumped the image's full ~249-line
manifest JSON into the journal — once per companion image, every reconcile pass
(.228: 21.6k journal lines / 10 min, 4131 inspect dumps). The service never
crashed (NRestarts=0); the sustained journald/IO flood starved the async runtime
and dropped the UI /ws/db websocket -> constant "connection lost"/reconnect.
Discard the child's stdout/stderr; only the exit status is used.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
It called bats-assert's `fail` (not loaded in this file) → "fail:
command not found"/127, masking the real reason. Emit+return instead,
bump the cold-restart RPC window 60s→120s (block-index reload), and
note a node mid-IBD legitimately can't serve getinfo (environmental
precondition, not a product regression).
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
The 2026-06-23 5×-green gate is DESTRUCTIVE-tier / ~8 core apps only —
it skips uninstall/reinstall (cascade) and has no progress-UI or
all-apps coverage. Manual multinode testing found real bugs it never
ran (immich+grafana uninstall hangs at full-red bar + ghost in My Apps;
grafana reinstall stops; fedimint guardian "waiting for bitcoin sync").
Adds §4 row F, §6b post-deploy order (netbird→Phase-3→F), §6c scope +
observed bugs + definition-of-done, a §5 warning, and §10 backlog to
investigate TanStack-Query/push-based state management for neode-ui.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
run-gate.sh 5/5 on .228. Reframe the TOP PRIORITY banner as
gate-green; keep the master plan as north-star source of truth; mark
the gate definition-of-done green and point at multinode as the next
exit criterion.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
run-gate.sh 5×-green on .228, 0 not-ok (gate-5x5.log). Records the
milestone in the header/banner, §4 workstream E, §6 sequence, and §8b;
demotes the priority banner per §6 item 6. Next: bundled testing deploy
(.116/.198 + UX frontend), multinode pass, workstreams B/C/D.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
- InAppBrowser now has a bottom control bar (back/forward/reload/open-in-browser/
close) mirroring the web mobile footer, plus a centered loading screen
(app favicon + progress bar) instead of a bare top bar over black.
- Commit a repo-dedicated debug keystore and pin signingConfigs.debug to it so
every machine — and the published companion download — signs debug builds with
the SAME key (fixes "App not installed" signature-mismatch on update). Force v1+v2.
- Bump versionCode 10→11, versionName 0.4.6→0.4.7.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
- Mobile launches use the store-driven panel (no route push) so the background
tab no longer changes and closing returns to where you launched from.
- Tab-only apps open directly (in-app WebView on companion / new tab on PWA) —
no "this app opens in a tab" interstitial.
- Shared AppLoadingScreen (app icon + progress bar) on the app session and the
legacy iframe overlay instead of a black screen.
- Pin the dashboard to 100dvh on mobile so the mesh chat/tools panes stop sliding
under the bottom tab bar in mobile browsers (no-op in the companion WebView).
- ElectrumX/electrs/electrs-ui ids now resolve to the real ElectrumX icon in My Apps.
- isMobile made reactive so overlay/footer/teleport decisions track the viewport.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
5× run #4 flaked iter4 on "immich exposes its web UI lan-address
(port 2283)": container-list returned lan_address=null because
immich_server was momentarily mid-recreate when the read-only tier
queried it (passed the other 4 iterations; immich_server does publish
0.0.0.0:2283->2283). Same single-shot-read class as the bitcoin-knots
state probe — poll <=30s for the exposed port instead of one read. A
genuinely unexposed immich never publishes 2283, so real port drift
is still caught.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
Record the overnight 5× outcome (2/5) and the triage: all three
fails were distinct one-offs. iter1 #5 bitcoin-knots = pre-launch
churn (hardened anyway); iter2 #74 + iter5 #73 = one real
orchestrator bug (phantom stack-member injection in
ordered_containers_for_start), now fixed + live-verified on .228.
Update the resume check command to gate-5x4.log.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
package.restart resolved its container list via
ordered_containers_for_start, which injected every name from the
union startup_order list that wasn't already present — including
variant names not live on a given node (mysql-mempool,
archy-mempool-api, archy-mempool-web). The phantom mysql-mempool is
2nd in the mempool start order, so do_orchestrator_package_start hit
its unknown-app-id fallback, do_package_start failed the inspect
("no such object"), and the `?` aborted the whole start sequence —
leaving mempool-api + the frontend down until the health monitor
recovered them minutes later. That was the source of the 5× gate
flakes #73 (frontend not running in 180s) and #74 (api not queryable
in 300s); root-caused from the .228 journal
("Start failed: mysql-mempool").
Replace the inject-then-sort logic with a pure helper
order_present_containers that orders only the actually-present
containers and never adds phantom entries. startup_order remains a
union of name variants across install generations — it's now used
purely to order what's live, not to inject what isn't. +3 unit tests.
Also harden bitcoin-knots.bats "valid state" probe: poll ≤30s for a
settled state instead of a single-shot read, so a container caught
mid-reconcile (transient restarting/configured) can't flake a 20-min
iteration. A genuinely-stuck container never settles, so real
breakage is still caught.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
Rename run-20x.sh → run-gate.sh, default ARCHY_ITERATIONS 20→5, and scrub
20× references across CLAUDE.md, the master plan, TESTING.md, app-registry
status, the orchestrator/config doc-comments, and the bats suites. Also add
a minimal fail() helper to mempool.bats so guard failures report cleanly.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
The frontend nginx used a literal proxy_pass host with no resolver, so it
pinned mempool-api's IP at worker startup. When the backend restarts (gate,
OTA, crash, reboot re-IPAM) podman reassigns its IP and nginx keeps proxying
to the dead one -> /api hangs, websocket 502s, UI shows 'offline' until a
manual nginx reload. Same stale-upstream-IP class as the netbird 502.
Fix: mempool-frontend:v3.0.1 rewrites the generated nginx-mempool.conf to
re-resolve the backend per-request via 'resolver' + a variable proxy_pass.
Resolver address is read from /etc/resolv.conf (podman aardvark-dns answers
on the network gateway, not Docker's 127.0.0.11). Per-location path mapping
preserved (ws -> '/', /api/v1 identity via no-URI, /api/ -> /api/v1/ rewrite).
Proven on .228: backend IP change now auto-recovers with no reload; the
literal-host control still 502s. Migrated the manifest off the retired
tx1138 registry to vps2.
Also: mempool.bats #74 waited only 180s post-restart (the slow path) and
called an undefined 'fail' helper (status 127). Bumped to 300s to match the
passing parity probes and emit a real failure instead.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
Captures: .228 1x-GREEN (110/110); hardened 5x DETACHED on .228 (/tmp/gate-5x2.log,
nohup — survives terminal close) with the exact check-from-any-machine command; all
shipped code fixes (commits) + deploy state (.228 + .198); node-state fixes NOT in
repo (lnd nginx proxy 8081->18083, home-assistant orphan unit removed, electrumx
re-registered); the run-ON-the-node lesson; and remaining work.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
The 1x gate is green; the 5x failed iters 1-2 on readiness-under-churn (apps DO
recover — lnd synced, mempool just mid-restart when probed — but slower than the
windows when restarted back-to-back). Hardening:
- run-20x.sh: best-effort settle_stack() before each iteration (wait for
mempool-api/frontend + lnd RPC healthy, 180s, on-node, never fails the run).
- required containers present/running (80/81): wait-loops (180s) not single-shot.
- mempool api/frontend (87/88): retry ~180s not single-shot.
- mempool queryable (74): 60s->180s. lnd restart-running (64): 120s->240s.
lnd getinfo (60): 90s->240s retry.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
Companion app: open every app in the in-app WebView (not just non-iframeable),
carrying the mobile-iframe footer controls into the WebView. Mobile web (PWA):
open tab-apps directly in a new tab. No interstitial on either surface. Touch
points + prior commits (b5a9deb8, d1fbcd9b) noted.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
Per direction: the gate is now 5x green ON .228 only (run on the node, not via RPC).
Fleet/multinode verification (.198 + others) moved to a new docs/multinode-testing-plan.md
with the bootstrap recipe, per-node preconditions (synced archival bitcoin, no stale
nginx proxy targets, no orphan quadlet units), node roster, and cross-node suites.
Updated CLAUDE.md, master-plan SS5/SS6/SS8b/WS-E, and TESTING.md release gates.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
- Curated files loader now MERGES per top-level folder: dropping real files into
demo/files/Music/ swaps only Music and keeps the sample Documents/Photos/Videos
(verified). Media plays with the Range support already in place.
- AIUI index.html: a ?seed bootstrap pre-loads the example "Content Showcase"
conversation into AIUI's IndexedDB by calling the bundle's own
seedPromptsToConversation() (identical to its /seed command), so the chat
history isn't empty when the demo points users to "previous chats". Guarded by
try/catch + an existence check; no-op without ?seed.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
- IndeeHub + Mempool: nginx reverse-proxy + strip X-Frame-Options/CSP + sub_filter
rewrite of absolute asset paths so the frame-busting SPAs load in the iframe
(mempool.space remains best-effort — third-party CSP/ws may still limit it).
- AIUI iframe gets ?mockArchy in demo → its built-in mock node data loads.
- Pay-with-mobile QR: invoice settles after ~2s (backend gate keyed by
payment_hash) and the poll tightened to 1s, so the QR is visible before auto-pay.
- Wallet settings: dummy Cashu mints (4) + Fedimint federations (2, 222,500 sats),
interactive per session (streaming.list/configure-mints, wallet.fedimint-list/
join/balance).
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
On a proper on-node .228 run (synced bitcoin, 4-fix binary) the lifecycle matrix is
green; these 4 were test-harness issues:
- lnd 'recovers after restart' (65): bump retry window 90s->240s. lnd cold-restart
recovery (wallet unlock + bitcoind reconnect + graph sync) exceeds 90s on a loaded
node but DOES complete (synced_to_chain:true).
- bitcoin ui responds (89): retry ~120s instead of single-shot (companion nginx may
have just been recreated by the companion-survives test).
- probe_app_url (99 lnd proxy + all ui-coverage proxy probes): retry up to 90s for
post-restart proxy/UI readiness instead of single-shot.
- required endpoints after restart (94): :8081 is nginx-proxy-manager, an OPTIONAL
app (not in required_containers) — only assert it when NPM is installed; and make
the trailing lncli getinfo a retry.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
The catalog pointed at a non-existent nostr.svg (handleImageError only falls
back .png→.svg, so an .svg miss stays broken). Point it at the existing nostr
icon. fedimint icon already uses fedimint.png (exists); the stale fedimint.jpg
request is resolved by /api/app-catalog now serving the local catalog.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
lnd's RPC isn't ready until its wallet auto-unlocks on (re)start, which lags the
container 'running' state — single-shot lncli getinfo raced that window and
false-failed (gate tests 60 + 85). Retry up to ~90s like a health probe. lnd is
functional (getinfo returns cleanly once ready).
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
- Mempool and IndeeHub load their real site directly in the iframe (reverted the
proxy/new-tab — per request "use https://indee.tx1138.com/").
- Real app UIs now served as whole static dirs under /app/<id>/ (express.static)
so their bundled assets (qrcode.js, css, bg images) resolve; /app/<id>/assets/*
redirect to the frontend's shared assets. Fixes the console 404 cascade.
- Bitcoin Core/Knots: register rpc/v1 + bitcoin-rpc on their paths (relay-status
no longer 404s); per-impl bitcoin-status preserved.
- AIUI chat returns a fixed line in demo ("Not available in demo, check out the
previous chats to experience AIUI") instead of calling Claude — no key spend.
- Add /api/app-catalog (serves the baked catalog) to stop that 404.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
- App UIs now use the real registry shells with dummy data: bitcoin-ui for
Bitcoin Core (Satoshi subversion) and Bitcoin Knots (Knots subversion) via
per-path /app/bitcoin-{core,knots}/bitcoin-status; the real lnd-ui (mock
/proxy/lnd/v1/getinfo+channels, /lnd-connect-info, /api/container/logs); the
static fedimint-ui. ElectrumX already on the real electrs-ui. Custom mock UIs
dropped — accurate UX.
- IndeeHub loads in the iframe: nginx reverse-proxies /app/indeedhub/ →
indee.tx1138.com and strips X-Frame-Options/CSP (it blocked framing before).
- Mempool opens in a new tab (mempool.space can't be iframed).
- Cloud media playback: HTTP Range support in the curated-file server so audio/
video can stream and seek (needs real files dropped into demo/files/).
- Dockerfile/.dockerignore copy docker/lnd-ui + docker/fedimint-ui.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
- immich restart: bump wait 120s->240s. Restart = ordered stop+start of the 3-
container stack (postgres->redis->server w/ DB migrations), so it needs at least
as long as the start test (180s) — the old 120s was inconsistent and false-failed
on loaded nodes. immich does return to running.
- fedimint orphan check: the unanchored 'total' regex (^fedimint) counts the
legitimate fedimint-clientd (dual-ecash bridge) but the anchored 'known' regex
omitted it -> total>known false orphan on every node running fedimint-clientd.
Add fedimint-clientd to known.
Both run as LOCAL podman/systemctl on the gate runner, so they test the runner node
(.116), not the RPC target — surfaced while driving the .228 gate green.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
- Mock app UIs (ElectrumX, LND, Fedimint, Bitcoin Core) + the "Not available"
notice now use the Archipelago black theme and show the app's My-Apps icon.
- Bitcoin Core gets its own UI (/app/bitcoin-core/) so it no longer shows Bitcoin
Knots branding; the Knots-branded bitcoin-ui shell is reserved for Bitcoin Knots.
- ElectrumX now serves the real electrs-ui shell (+ qrcode.js + a dummy
/electrs-status) with the correct ElectrumX icon; "Electrs" renamed to ElectrumX.
- My Apps: pre-install Bitcoin Knots again, drop ThunderHub, rename Electrs→ElectrumX.
- App store no longer shows "Checking…" forever in demo — non-demoable apps show
"No demo" immediately (skip the container-scan state).
- Relay endpoint no longer reveals a real domain (randomised host).
- Dockerfile/.dockerignore copy docker/electrs-ui into the backend image.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
Independent companion loop (452f05d8) validated on .228: deleted archy-electrs-ui
recreates in ~10s (was stuck 100s+). Also: companion-survives bats does LOCAL
rm/systemctl --user, so running it from .116 via RPC tests .116's companions with
.116's binary, NOT the remote target — must run ON the target node. Explains the
'failed on both nodes' runs (both silently tested .116).
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
The companion-unit repair stage ran at the END of each boot-reconciler tick, after
reconcile_existing(). On a heavily loaded node that per-app pass takes >60-90s, so a
deleted/lost companion unit (electrs-ui, bitcoin-ui, …) wasn't repaired within any
reasonable window (gate test 31 'deleted unit recreated within one reconcile tick'
timed out at 90s on the 45-app .228 node). Detecting + rewriting a companion unit is
cheap, so spawn it as its own ~interval(30s) loop, independent of the slow app pass.
Handle is aborted when the main loop exits (shutdown uses notify_one, so a second
waiter would steal the wake permit). tick() is now app-reconcile only.
All 4 boot_reconciler cadence tests still green (companion_stage=false in tests).
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
- nginx-demo.conf + vite proxy now route every /app/<id>/ to the mock backend, so
the per-app mock UIs and the generic "Not available in the demo" notice render
(previously only /app/filebrowser was proxied → most apps 404'd).
- Mempool and IndeeHub now load in the in-app iframe (not a new tab).
- Add an LND Lightning mock UI (channels, balances, routing) with dummy data;
lnd/thunderhub are demoable. Notice page reworded to "Not available in the demo".
- Fix missing icons: Bitcoin Core → bitcoin-core.png, Mempool → mempool.webp.
- Pre-install only Bitcoin Core (drop duplicate Bitcoin Knots; still installable).
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
Last 2 .228 stragglers confirmed load/timing, not bugs: test 31 (companion recreate)
= contamination + ~108s reconcile cadence > 90s window; test 55 (immich restart) =
heavy stack restarts >120s under load but DOES return. Path to literally-green gate
is infra (bitcoin sync, re-quadletize .228) + minor test-window tuning. Optional
product improvement noted: independent ~30s companion-reconcile cadence.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
companion::reconcile only recreates a deleted companion unit when its parent
backend is in manifest_ids. On contaminated .228, electrumx ran as plain podman
and was NOT a tracked manifest install (manifest on disk but unloaded), so the
reconciler never iterated it -> archy-electrs-ui companion orphaned. Proven:
package.install electrumx re-registered it + restored the companion. Self-heal
logic is sound; test 31 clears on re-quadletize. electrumx on .228 de-contaminated.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
The backend COPY of docker/bitcoin-ui failed in Portainer because .dockerignore
(* + whitelist) excluded it. Re-include docker/ then exclude its contents except
bitcoin-ui, so the build context contains the Bitcoin UI mock shell. demo/files is
already covered by !demo/.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
- demo/files/<Folder>/<file> becomes the cloud's content for every visitor
(read-only; "private login" = git/repo access). Text inlined, binaries streamed
from disk; empty folder falls back to the built-in seeded set.
- Dockerfile.backend now copies docker/bitcoin-ui and demo/files into the image
(they live outside neode-ui/) — this also fixes the Bitcoin UI mock, which the
backend reads from /docker/bitcoin-ui and was previously absent in the container.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
.228 104/110, .198 94/110 with the 3-fix binary. Every package.stop test passes on
healthy apps. .198's 14/16 failures trace to bitcoin in IBD (test 83: ~137k blocks
behind) cascading to lnd/btcpay/electrumx/mempool. 2 node-independent: companion
recreate (31, both nodes), fedimint orphan pollution (44). Path to green 5x gate is
now infra (sync bitcoin, re-quadletize .228) + minor (test 31), not lifecycle bugs.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
